Shulou(Shulou.com)05/31 Report--

This article mainly introduces how to install a solid state drive on a computer. It has certain reference value. Interested friends can refer to it. I hope you will gain a lot after reading this article. Let Xiaobian take you to understand it together.

1. Find the cable for installing SSD in the chassis, first of all, the power input interface of SSD, this is the cable from the power supply of computer. The word P4 does not have a special meaning, but only indicates that this is the fourth such interface provided by the power supply. The shape is flat mouth shape.

2. Then there is the SSD hard disk data input and output interface, SATA cable, width is much shorter than the hard disk power cable, relatively small is also flat mouth.

3. Install a Kingston SSD, model SSDNow V100 128G, with nominal read/write performance of 250/220 MB/S.

4. The wire is aligned with the corresponding interface at the end of the SSD, which is basically difficult to make a mistake, because the interfaces are dedicated, and the mistake is not inserted.

5. Connect the power and data lines to the corresponding SSD interface positions.

6. Put it in the case, cover the side panel, and you're done.

Thank you for reading this article carefully. I hope that the article "How to Install Solid State Drive on Computer" shared by Xiaobian will be helpful to everyone. At the same time, I hope that everyone will support you a lot and pay attention to the industry information channel. More relevant knowledge is waiting for you to learn!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.