Shulou(Shulou.com)06/02 Report--

In this issue, the editor will bring you about how to mount the hard drive on linux. The article is rich in content and analyzes and narrates it from a professional point of view. I hope you can get something after reading this article.

1. Look at the disk and find the new hard drive installed: fdisk-l 2, use fdisk sdb to partition, enter p to view the new hard disk partition: n command to create a new partition; d command to delete an existing partition; p command to display the partition list; t command to modify the partition type ID number; l command to display the list of partition ID numbers; a command to specify the boot partition; w command to make changes to the partition table take effect 3, according to the prompts, enter: Njie pcent w 4, format partition: mkfs-t ext4 / dev/sdb 5, mount disk: mkdir / disk2 > > mount / dev/sdb / disk2

The above is the editor for you to share the linux how to mount the hard drive, if you happen to have similar doubts, you might as well refer to the above analysis to understand. If you want to know more about it, you are welcome to follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.