Shulou(Shulou.com)06/03 Report--

A few days ago, I set up an experiment on the network of Chinese cabbage. I wanted to test how to use SDM to build a × × server on cisco. I found that there was a big gap between books and reality. I took a lot of detours in the process of building the experiment, and learned a lot of knowledge that had been ignored before. Write this blog post by yourself and record everything in the process of doing the experiment.

Note: the text and pictures in this article are from http://www.guanwei.org/post/Cisconetwork/06/SDM-dynamips.html.

The tools you need to prepare for the first step

DynamipsGUI

Jre-1_5_0_08-windows (Note: the installation of SDM must be version 1.5, if it is the latest version of the Java virtual machine is likely to make errors. ) give the address of the network disk. Friends who need it can download http://u.115.com/file/f69fb87757.

SDM-V25 (Note: this is the latest English version, I found that only the latest English version can recognize the × × × feature set, the V24 Chinese version cannot recognize the × × feature set) the English version of http://u.115.com/file/f6828ccc41 also gives the address of the Chinese version of the network disk http://u.115.com/file/f68f5402fd.

SecureCRT 6.2This is all available there, so the address will not be given. )

If you are not familiar with Dynamips, please read more documents.

Step 2 Dynamic connects to the local network card

I'll build a route here.

IOS:c3640-ik9s-mz.124-7 (I have been looking for this IOS for a long time. For more information on IOS naming, please refer to http://dzj990954.blog.51cto.com/blog/783263/410917). Give the address http://u.115.com/file/f64b2faf3 of the network disk.

Computer bridge parameters point will come out to select their own network card parameters on the OK to fill in.

Format:\ Device\ NPF_ {A80F9AA7-9A39-4BBB-9357-300943B475FE}

This is mine! Oh, so that the host and ROUTE can communicate!

Then select the route parameter slot 0: nm-4e

What you see is connected to the E0ram 0 port of router.

My native IP is 192.168.1.55

Then I will set the E0apace of router to a network segment so that I can connect to it.

PING before you connect and see if you can get through!

Then generate the topology configuration file.

If you still have trouble connecting to the local network card in dynamic, you can take a look at this blog post, which is more detailed.

Http://dzj990954.blog.51cto.com/blog/783263/410915

Step 3: start the routing configuration parameters

The IP configured with E0AG0 is 192.168.1.2

You see, the interface E0swap 0 is about to UP.

Through the IP of the PING host, it also makes sense!

Step 4 SDM connection configuration

Just fill in the interface address of E0max 0 and be on the same network segment as the host.

Lower the security properties in the browser! Click to start on the note, the following step is very critical, in this step I spent more than half an hour in the IE browser properties to select "allow active content to run on my computer" can not open SDM and the code dialog box appears is not checked this option, and IE pop-up second dialog box must not be closed.

If there is no choice, pop up the following

If you follow the options above, check the box

O (∩ _ ∩) O ~ finally entered.

Look at the add-on.

At this point, our SDM connection configuration is complete.

If you have any questions about SDM, you can refer to the following blog post.

Http://dzj990954.blog.51cto.com/blog/783263/410916

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.