Shulou(Shulou.com)05/31 Report--

Today, I would like to share with you the relevant knowledge points about how to solve the common problems of xp display. The content is detailed and the logic is clear. I believe most people still know too much about this, so share this article for your reference. I hope you can get something after reading this article. Let's take a look at it.

Fault 1: the screen of the monitor shakes so badly that even the icon and text can not be seen clearly when it is turned on. It will not return to normal until one or two minutes later. This often happens in wet weather due to moisture inside the display.

Solution:

To solve this problem, we can open the back cover of the monitor, string the moistureproof sand in the usual food packaging with cotton thread, and hang it near the neck and tail of the picture tube near the tube seat.

Fault 2: after the computer is turned on, there is a sound but the monitor is pitch black, and it will take dozens of minutes for the picture to appear. This situation is due to the leakage of the picture tube holder, so we have to replace the tube holder.

Solution:

Take apart the back cover of the monitor, here we can see a small circuit board at the end of the picture tube, and the tube holder is welded to the circuit board. Carefully unplug it, buy a new tube holder, put it on the circuit board, and find a small piece of sandpaper to wipe the protruding pin behind the end of the imaging tube with sandpaper, otherwise it is easy to "relapse".

Glitch 3: there is always interference clutter or lines on the computer monitor screen, and there is always an annoying noise in the speakers. This phenomenon is due to the poor anti-interference of the power supply.

Solution:

In this case, if conditions permit, you can consider replacing a new power supply. And if the hands-on ability is strong, you can also try to replace the filter capacitor in the power supply, if the effect is not obvious, you can replace the switch tube.

Fault 4: computer monitor blurred screen is also a problem often encountered by many users, this kind of problem is mostly caused by the graphics card, and may be the poor quality of the card or incompatibility, and the correct driver has not yet been installed. If the video memory is added to the old card, it may be due to the difference between the new video memory and the original video memory model parameters.

Fault five:

There are generally three situations in which the display screen is black. First, no signal is transmitted to the display due to reasons such as damage to the display card or disconnection of the monitor. In this case, the indicator light of the display will keep flickering. Second, the computer resolution is set too high, more than the maximum resolution of the monitor will also appear black screen phenomenon, serious will also destroy the monitor. Third, hardware conflicts can also cause black screens.

These are all the contents of this article entitled "how to solve common problems with xp monitors". Thank you for reading! I believe you will gain a lot after reading this article. The editor will update different knowledge for you every day. If you want to learn more knowledge, please pay attention to the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.