Shulou(Shulou.com)06/01 Report--

This article is to share with you about how to use the common command nmcli in Linux. The editor thinks it is very practical, so share it with you as a reference and follow the editor to have a look.

Linux common command nmcli command can complete all the configuration on the network card, and can be written to the configuration file.

Syntax format nmcli [parameters]

Common parameters: d interface for monitoring and managing network devices c connection for monitoring and management of network devices reference example displays a list of all connections:

[root@linux265 ~] # nmcli con show to view API information:

[root@linux265 ~] # nmcli device show defines a new connection named default, which uses DHCP to automatically connect through the Ethernet of eth0 devices:

[root@linux265 ~] # nmcli con add con-name "default" type ethernet ifname eth0 turns off automatic connection:

[root@linux265 ~] # nmcli connection modify "static" connection.autoconnect no add DNS:

[root@linux265] # nmcli connection modify team0 ipv4.dns 8.8.8.8 Thank you for reading! This is the end of the article on "how to use nmcli in Linux". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, you can share it for more people to see!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.