Network Security Internet Technology Development Database Servers Mobile Phone Android Software Apple Software Computer Software News IT Information

In addition to Weibo, there is also WeChat

Please pay attention

WeChat public account

Shulou

Remote management of Huawei router through telnet

2025-01-30 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Servers >

Share

Shulou(Shulou.com)06/02 Report--

Use Huawei simulator ensp to build two new analog routers AR3260,cable using copper wires. Set IP addresses to the interfaces of both routers for the first time.

Sys (enters system view mode)

The first one

Enter system view, return user view with Ctrl+Z.

[Huawei] int

[Huawei] interface g

[Huawei] interface GigabitEthernet 0Universe 0 (routing interface command is configured here)

[Huawei-GigabitEthernet0/0/0] ip add 192.168.1.2 24 (interface IP address)

Jan 29 2018 19:02:26-08:00 Huawei% IFNET/4/LINK_STATE [1]: The line protocol

IP on the interface GigabitEthernet0/0/0 has entered the UP state.

[Huawei-GigabitEthernet0/0/0]

[Huawei-GigabitEthernet0/0/0]

[Huawei-GigabitEthernet0/0/0] undo shutdown (activate API)

Radio 2 (ibid.)

[Huawei-GigabitEthernet0/0/0] ip add 192.168.1.1 24

Jan 29 2018 19:01:32-08:00 Huawei% IFNET/4/LINK_STATE [1]: The line protocol

IP on the interface GigabitEthernet0/0/0 has entered the UP state.

[Huawei-GigabitEthernet0/0/0]

[Huawei-GigabitEthernet0/0/0]

[Huawei-GigabitEthernet0/0/0] undo shutdown

After the completion of the above, enter the settings through the second station to enter the system view mode (as below)

[Huawei] user-interface vty 0 1 (variable of access terminal)

[Huawei-ui-vty0-1] authentication-mode password (password setting)

Please configure the login password (maximum length 16): 123 (password)

[Huawei-ui-vty0-1] protocol inbound telnet (access method)

[Huawei-ui-vty0-1] user privilege level 12 (level of user access, variable)

As follows, access to 192.168.1.1 is conducted through the first one.

Telnet 192.168.1.1

Press CTRL_] to quit telnet mode

Trying 192.168.1.1...

Connected to 192.168.1.1...

Login authentication

Password: (password here)

Sys

Enter system view, return user view with Ctrl+Z.

[Huawei] sysname J1 (here by remotely modifying the user name)

[j1]

[j1]

[j1]

Using telnet mode to remotely access Huawei router in the above way saves the hard task of network operation and maintenance personnel running at both ends!

Please understand the above deficiencies, thank you for your valuable advice!

If you feel good, don't forget to like, retweet and comment!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.

Views: 0

*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.

Share To

Servers

Wechat

© 2024 shulou.com SLNews company. All rights reserved.

12
Report