Shulou(Shulou.com)06/02 Report--

Editor to share with you the method of setting the linewidth of the cad layer. I hope you will gain a lot after reading this article. Let's discuss it together.

The way to set the lineweight of cad layer: first, at the bottom of the drawing area, move the mouse to the [Show / hide wireframe] icon switch; then press the right mouse button to select settings, pop-up lineweight settings dialog box, in which you can select the desired lineweight.

How to set the lineweight of cad layers:

1. Set the lineweight directly in the layer, open the layer Manager, find the corresponding layer, click the lineweight directly, and set the width you want. The thick solid line is generally 0.3 and the thin solid line is generally set to 0.15

2, if it is an existing drawing and set its width, double-click the drawing directly, then pop up the properties dialog box, and select the desired width in the drop-down box on the right side of the line width.

3. Another way to move the mouse to the icon switch that shows / hides the wireframe at the bottom of the drawing area, as shown in the following figure

4, press the right mouse button to select settings, pop-up lineweight settings dialog box, in which you can select the desired lineweight.

5, finally, you can also use the lineweight format of the known layer to paint the same lineweight as the known layer, enter the command MA below, press confirm, select the lineweight of the known image, and then select the image you want to change.

After reading this article, I believe you have a certain understanding of the method of setting the linewidth of cad layers. If you want to know more about it, you are welcome to follow the industry information channel. Thank you for reading!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.