Shulou(Shulou.com)05/31 Report--

This article mainly introduces the relevant knowledge of "how to install notebook memory strips". The editor shows you the operation process through actual cases, the operation method is simple and fast, and it is practical. I hope this article "how to install notebook memory strips" can help you solve the problem.

Notebook memory bar installation notes:

1. When installing the notebook memory bar to put the computer in reverse, you should pay attention to putting something underneath to avoid scratching the top cover of the notebook.

2. When installing the memory bar, pay attention to the operation must be careful, handle gently, do not force too much, otherwise it will damage all kinds of parts.

3. If you have a different type of notebook and do not know its structure, it is best not to install it without authorization so as to avoid damage.

Install the details of the memory bar:

Step 1: prepare for the work

First get the laptop, screwdriver and memory ready, and it is recommended to prepare a small box and other things to facilitate the placement of screws and other small parts removed from the computer later. Another job is to remove static electricity, which may harm the computer's integrated circuit chips, damage the computer, wash hands or come into contact with metal doors and windows to release static electricity.

Step 2: open the computer cover

There will be a memory bin mark on the back of the notebook and open the upper cover with a screwdriver. Of course, different models and brands of notebooks will be different, but they are more or less the same, be careful not to make a mistake, if you are not sure, it is best to check the manual or consult a professional.

Step 3: remove the memory

If you have only one memory slot in your notebook, you need to remove the original memory in order to upgrade the memory. the method is very simple. There will be two spring buckles on both sides of the memory. Remove the snap with the fingertips of your left and right hands, and the memory will pop up automatically. Then remove it. If you don't need to remove the memory, you can skip this step and proceed to step 4.

Step 4: install the memory bar

Snap the notebook memory at the notch into the tooth position, adjust the position, two fingers hold the depressions on both sides of the memory at an angle of about 45 degrees to feed the notebook memory into the memory slot, and then tap it. Hear a crisp "click" sound is done. If you don't hear the noise, it's probably not installed properly and needs to be reinstalled. After installation, close the back cover and tighten the screw with a screwdriver.

Step 5: detect memory

Finally, check to see if the memory is recognized by the system. The method is very simple, first need to enter the notebook bios, let bios first identify the memory, most notebooks are boot press f2 key (boot opportunity has a hint, or refer to the manual) to enter bios. After rebooting and booting into the system, right-click the computer or my computer, and you can see the amount of memory in the General tab.

This is the end of the content about "how to install the notebook memory stick". Thank you for your reading. If you want to know more about the industry, you can follow the industry information channel. The editor will update different knowledge points for you every day.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.