Shulou(Shulou.com)05/31 Report--

This article will explain in detail how to implement Zabbix monitoring through iLO for HP server integration. Xiaobian thinks it is quite practical, so share it with you as a reference. I hope you can gain something after reading this article.

iLO is Integrated Lights-out, which is an integrated remote management port on some HP servers that allows users to remotely manage servers based on different operating systems, enabling virtual presence and control for intelligent infrastructure and management. We can do zabbix monitoring via iLO.

1. Server node, and access the display and keyboard, and then boot

During POST, press F8 to enter the iLO setup interface:

2. Enter the settings of iLO: "Set Defaults" under File is to restore all settings to factory values.

3. Configure the network:

Set IP address and DNS separately. IP should be in the same network segment, pay attention to the consistency of subnet mask. (IP address/Subnet Mask/Gateway IP address can only be set if DHCP is set to Disable)

DNS names are on cards on the front of the server, along with administrator accounts and passwords.

IP must be static, so DHCP must be set to OFF.

5, here you can add, delete, change the password of remote access User, permissions, etc.

Add user

Remove

Edit

Settings Options Set Keyboard properties, etc., generally default values.

About contains information such as the firmware version of iLO.

About "how to monitor Zabbix through iLO to achieve integration for HP server" this article is shared here, I hope the above content can be of some help to everyone, so that you can learn more knowledge, if you think the article is good, please share it to let more people see.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.