Shulou(Shulou.com)06/01 Report--

This article mainly introduces "minicom installation and use tutorial under Linux", in daily operation, I believe many people have doubts about minicom installation and use tutorial under Linux, Xiaobian consulted all kinds of information, sorted out simple and easy to use operation method, hope to answer "minicom installation and use tutorial under Linux" doubts helpful! Next, please follow the small series to learn together!

1. Install minicom

The code is as follows:

$ sudo apt-get install minicom

2. Configure minicom

2.1 Start minicom

The code is as follows:

$ sudo minicom

2.2 Start and configure minicom

The code is as follows:

$ sudo minicom -s

3. Minicom common functions

3.1 Turn on line feed

The code is as follows:

$ sudo minicom -w

3.2 Lrz serial port transmission public

Ctrl + A, Z

3.3 parameters

Minicom is window-based. To pop up the window for the desired function, press Ctrl-A (below

Use C-A for Ctrl-A), then press the function keys (a-z or A-Z). Press C-A first, then

Press 'z', a help window will appear, providing a brief description of all commands. Configure minicom

(-s Option, or C-A, O), you can change this escape key, but now we also

It's Ctrl-A.

The following keys are available in all menus:

UP arrow-up or 'k'

DOWN arrow-down or 'j'

LEFT arrow-left or 'h'

RIGHT arrow-right or 'l'

CHOOSE Enter

CANCEL ESCape.

The screen is divided into two parts: the upper 24 acts as the terminal simulator screen. ANSI or VT100 escape

The sequence is interpreted in this window. If there's one line left at the bottom, the status line goes there;

Otherwise, the status line appears every time you press C-A. On terminals that have dedicated status rows will

Use this line if the termcap information is complete and the-k flag is added.

The following is an alphabetical list of available commands:

C-A Pressing C-A twice will send a C-A command to the remote system. If you put "escape character"

If you replace it with something other than C-A, it works similarly for that character.

A Toggle "Add Linefeed" to on/off. If it is on, then every time the Enter key is on the screen

Before displaying, add a linefeed.

B provides you with a scroll back buffer. Press u to scroll up, d to scroll down,

Press b to turn up a page, press f to turn down a page. Arrow keys and page keys are also available. S or S keys available

(Case-sensitive) Finds a string of text in a buffer and presses N to find the next occurrence of the string.

Press c to enter reference mode, the text cursor appears, and you can press Enter to specify the starting line.

Rollback mode will then end and content with the prefix '>' will be sent.

C. Clear screen.

D Dial a number, or go to the dial directory.

E Toggle local echo to on/off (if your version of minicom supports it).

F sends the break signal to the modem.

G Run script (Go). Run a login script.

H hangs up.

I toggles the type of escape sequence sent by the cursor key between normal and application modes (see also below

Comments on status lines).

J jumps to shell. On return, the entire screen will be refreshed.

K Clear screen, run kermit, refresh screen when returning.

L File capture switch. When turned on, all output to the screen will also be captured in the file.

M sends a modem initialization string. If you are online and the DCD line is set to on, then the modem is initialized.

The former will ask you for confirmation.

O Configure minicom. Go to the configuration menu.

P Communication parameters. Allows you to change bps rate, parity and number of bits.

Q Leave minicom without resetting modem. If macros are changed and not saved,

It gives you a chance to save.

R receives documents. Choose from various protocols (external). If filename is selected window and below

A download directory prompt is available and a window appears asking you to select a download directory. will be used

Download directories defined in the Filenames and Paths menu.

S Send documents. Select the protocol you use in receiving commands. If you don't make the filename selection

Windows available (set in File Transfer Protocols menu), you will only be able to access one

Write the file name in each dialog window. If you make it available, a window pops up showing

File name in your upload directory. You can use the space bar to add or unmark a file name.

Cursor keys or j/k keys move the cursor up and down. The selected file name is highlighted. Directory name in

Square brackets indicate that pressing the space bar twice moves up and down the directory tree. Finally, press

Enter Send file, or press ESC to exit.

T Select terminal analog: ANSI(color) or VT100. Here you can also change the backspace key to open or

Close the status line.

W toggles linewrap on/off.

X Exit minicom, reset modem. If macros are changed and not saved, they will be provided.

You have a chance to save.

Z The help screen pops up.

At this point, on the "Linux minicom installation and use tutorial" learning is over, I hope to solve everyone's doubts. Theory and practice can better match to help you learn, go and try it! If you want to continue learning more relevant knowledge, please continue to pay attention to the website, Xiaobian will continue to strive to bring more practical articles for everyone!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.