Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, Nanjing Apple store, Nanjing Apple many people do not know, now let's take a look!

Where is the Nanjing Apple after-sales Service Center?

Nowadays, there will be some problems with electronic products. Today, let's talk about the problem that the phone will not be charged, Apple's solution to the problem, and the address and phone number for maintenance.

Nanjing Apple maintenance

Room C2, 16th floor, Century Commercial Plaza, 49 Zhongshan South Road, Qinhuai District, Nanjing

Tel: 400-623-6800

1. First press the home button below, and then press the boot button. The battery will come out after a while. Charge it immediately. It is recommended to go to Apple for after-sales maintenance.

two。 In some cases, it is not the original charger. The situation shown below may be caused by quality problems. Of course, it may also be caused by the substandard specification of the charger. Try another qualified charger.

3. If the original charger has the above faults, please refer to the following tips:

4. Please check that the data cable is normal. The cable looks normal on the outside, but it may be broken inside. My data cable was broken before I cut the outer plastic. The way to check is to borrow someone else's data cable to see if you can recharge it.

5. The display plug symbol is usually displayed only when it is full. Now it is full or the battery is low, but it can be displayed, indicating that there is no problem with the phone's tail plug. You should try another charger first. If it still doesn't work, the battery is broken.

6. Thirdly, check whether the original charger can work properly. You can use the USB port to connect the charger to other mobile phones to see if it works properly. Although not all chargers are suitable for iPhone, iPhone chargers are compatible with all USB phones. (in special cases, Nokia's data cable is a data cable with an identification device, as shown in figure 2)

7. If the above methods still don't work, try plugging into the USB port of your computer. If you can identify it, let's see if it's charging. If it is identified but there is no charge, it is estimated that it needs to be repaired. If it cannot be identified and recharged, it must be repaired. If there is nothing wrong with the plug-in, there is something wrong with the charger. The charger may have a damaged charging head or damaged data cable.

8. Be careful not to confuse the pad with the phone's power adapter. The voltage is different, try to use your original charger.

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.