Shulou(Shulou.com)05/31 Report--

This article is to share with you about the VMware Bridged network in Windows 10 does not work properly or how to test how to solve, the editor feels very practical, so share with you to learn, I hope you can learn something after reading this article, say no more, follow the editor to have a look.

If you try to connect a virtual machine to a LAN computer, but it does not work properly, or if the Bridged network does not run in VMware, you can use the following solution to resolve this problem. This is a very common situation among new VMware users. Even if you have been using VMware for a long time, you can try these solutions when the Bridged network suddenly stops working.

Many people often need to connect their virtual machines to LAN computers to share files. This is very easy for your host. The problem begins when you try to do the same for the client operating system in VMware. This occurs because the non-shared network adapter is responsible for creating connections between LAN computers and virtual machines.

The VMware Bridged network is not working properly

The following different methods will help you fix Bridged network problems in VMware

Choose the correct network connection

Restart VMware Bridge Control

Select a specific virtual network

Select the correct bridging network connection

Restore all settings to default values

Disable unnecessary networks in the host

Disable the firewall / application from the host.

1. Select a connection network connection

By default, VMware uses the NAT to share the host's IP address option so that the virtual machine can use the host's IP address when creating network connections. This can cause problems due to IP conflicts.

Therefore, you can select a dedicated option, which allows you to easily establish a bridging connection. If you select this option, you are allowed to replicate the connection status of the host. In other words, you will get more flexibility.

To use this option, select the virtual machine, and then click the Edit Virtual Machine Settings option. After that, select Network Adapter on the hardware tab. On the right, you should get an option called Bridged: connect directly to the physical network.

Select it and click OK to save the changes.

two。 Restart VMware Bridge Control

Sometimes, a simple restart fixes a major problem. You can also use the same technique to solve this problem. With the command prompt, you can restart VMware Bridge Control very easily. If there are some internal problems in VMware, you can resolve them by doing this. To restart VMware Bridge Control, open a command prompt with administrator privileges and enter these commands one by one-

Net stop vmnetbridge net start vmnetbridge

3. Select a specific virtual network

If you select the bridging, NAT, or Host only options, VMware may use the wrong virtual network. Although this situation is very rare, it can happen to you. Therefore, this is a very good choice, and you can manually select a specific virtual network so that each vulnerability can be blocked.

To do this, select the virtual machine, and then click the Edit Virtual Machine Settings option. After that, go to the Network Adapter option. On the right, you should select the customize: specific Virtual Network option under the Network connections section.

From here, you need to select VMnet0 and save your settings.

4. Select the correct bridging network connection

By default, VMware automatically selects a network adapter when creating a bridged network. If you receive the above error on the guest operating system, you can select the correct network adapter to create a bridge connection. To do this, open VMware and go to Edit > Virtual Network Editor. After you open the window, you need to click the change Settings button and grant it administrator rights to make any changes.

After that, you should find VMnet0 in the list. Make sure this is selected. After that, select Bridged from VMnet Information, and then select the host's network adapter from the drop-down menu.

Now click the OK button to save your changes.

These are some effective ways to solve this problem. However, if you still encounter the same problem, you can also follow the following guidelines.

5. Restore all settings to default values

If you make a lot of adjustments and the Bridged network has stopped working since then, you can always use the reset option, which will make everything look like new. To use this option, open the virtual network editor and click the change Settings button to make any changes in this window. After that, you can find the restore default option that you want to use.

6. Disable unnecessary networks in the host

This may cause this problem if you have used a host to connect to multiple Ethernet connections. The way to detect this is to disable all other network adapters in the host. To do this, press Win + R to open the run prompt and enter ncpa.cpl.

Here, you can find all the network connections. Right-click each connection and select disable. Do not disable the currently connected network connection and all networks named VMware Network Adapter.

7. Disable firewalls / applications from the host

If you recently installed a firewall on a host or virtual machine, it is recommended that you disable it temporarily and check to see if the problem persists.

The above is the VMware Bridged network in Windows 10 does not work properly or how to detect how to solve, the editor believes that there are some knowledge points that we may see or use in our daily work. I hope you can learn more from this article. For more details, please follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.