Shulou(Shulou.com)06/02 Report--

This article is about how to use the cad regeneration command. The editor thinks it is very practical, so share it with you as a reference and follow the editor to have a look.

How to use the cad regeneration command: first enter the CAD interface and find the circle command; then draw a circle and enter the re command; then select the circle you just drew; finally press enter to see that the graphics are being regenerated.

How to use the cad rebuild command:

1. Open the software CAD and enter the CAD interface, as shown in the figure:

2. Find the circular command in the interface, as shown in the figure:

3. Use the circle command, draw a circle in the drawing area, and then enter the re command in the command input line, as shown in the figure:

4. After entering the re command, we are prompted to select the object, and we select the circle we just drew, as shown in the figure:

5. After selecting the circle, press enter to see that the drawing is being regenerated, as shown in the figure:

6. The circle after rebirth, as shown in the figure:

Thank you for reading! This is the end of this article on "how to use the cad regeneration command". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, you can share it for more people to see!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.