In addition to Weibo, there is also WeChat
Please pay attention
WeChat public account
Shulou
2025-01-18 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Development >
Share
Shulou(Shulou.com)06/01 Report--
This article mainly introduces the relevant knowledge of "how to install Linux+Windows dual system". The editor shows you the operation process through an actual case. The operation method is simple, fast and practical. I hope this article "how to install Linux+Windows dual system" can help you solve the problem.
1.UltraISO installation system USB disk
This step should not be described too much, whether it is to install windows or ubuntu system, the production system USB disk is necessary. Bloggers use the system USB disk installed by UltralSO. You must download the Ubuntu image before installation. You can choose which version you want according to your needs.
two。 Set up USB flash drive startup
Enter the BIOS to set up the USB disk to start, this step is also a necessary step to install Win10, different brand setting methods are different, we should set up according to our own model. After it is set, the USB disk can be started automatically after the system disk is plugged in.
3.Win10 creates a disk partition
Win+X enters the disk partition directory and sets the disk partition prepared by the Linux system. Here, you can set it according to your own needs. The picture shows the disk partition of the blogger's Dell computer, which displays two disks because there is a solid-state hard disk, but only one disk will be displayed on the Asustek computer. Here, you need to set up a large partition (according to your own needs, the blogger has set 150G). The following partitions are set when Ubuntu is installed, and the red boxes are the partitions after the dual systems are installed.
4. Disable Quick start
After installing the system, the blogger found that he could not open the Grub boot dual system. After searching the Internet for a long time, he found that Win10 started quickly, so he had to do this step first under Win10 (but he didn't find that this step was needed when installing Dell).
Press and hold Win + X, select Power options, and execute: select Power Button function-> change currently unavailable Settings-> deselect enable Quick start
5. Install Ubuntu
All right, now you can insert the flash drive. After the insertion, the flash drive will be loaded automatically because it was set up before. After that, there will be four options, it is recommended to choose Try Ubuntu Without Installing, and then there is an installation icon on the desktop. Bloggers used the Install Ubuntu option before, but they are all the same, except that the Try Ubuntu Without Installing option allows you to install the system while using Firefox, and you can find it when you encounter problems.
After choosing to install, remember to select other options, locale and language are set by yourself, and the input method option is best to choose the English keyboard.
After that, there is the setting of partitions. Bloggers start with the original partition settings found on the Internet, but after setting the last partition, they find that the last partition is not available. After looking for it on the Internet, it is found that there is only one disk (it seems that a disk can only have two primary partitions, so this problem is not found when installing Dell gates). Then according to the following settings, it can be installed normally.
Logical partition of 16g swap space
Logical partitioning of 60g / Ext4 journal file system
Logical partitioning of 500m / boot Ext4 log file system
/ main partition (remaining space)
After that, the settings will be installed normally.
6.EasyBCD boot
If you follow the previous steps, you will normally enter the grub interface after booting, but the blogger's Asus FXJ50 computer cannot enter the grub interface, and the selected system settings for booting can not be found in BIOS, so you have to download EasyBCD to boot.
After setting up, restart the computer and you can choose normally. Choose Ubuntu to enter the system and you can use it normally.
After that, you can operate Ubuntu happily.
This is the end of the introduction on "how to install Linux+Windows dual systems". Thank you for your reading. If you want to know more about the industry, you can follow the industry information channel. The editor will update different knowledge points for you every day.
Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.
Views: 0
*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.
Continue with the installation of the previous hadoop.First, install zookooper1. Decompress zookoope
"Every 5-10 years, there's a rare product, a really special, very unusual product that's the most un
© 2024 shulou.com SLNews company. All rights reserved.