Shulou(Shulou.com)06/01 Report--

Generally speaking, optical fiber jumper is a medium between equipment and optical fiber wiring equipment, which has a thick protective layer. The connection between optical terminal and terminal box is generally used in some fields such as optical fiber communication system, optical fiber access network, optical fiber data transmission and local area network. So what is the MPO fiber jumper and what are the types? The following easy sky optical communication ETU-LINK will introduce the MPO optical fiber jumper in this article.

What is the MPO jumper?

MPO optical fiber jumper, MPO (Multi-fiberPushOn) connector is one of the MT series connectors. The core inserts of MT series are precisely connected by two guide holes with a diameter of 0.7mm on the end face of the core insert and the guide needle (also known as PIN needle). MPO connectors and optical fiber cables can be processed to produce various forms of MPO jumpers. MPO jumpers can be designed with 2'12 cores and up to 24 cores. Currently, 12-core MPO connectors are the most commonly used. The compact design of the MPO connector makes the MPO jumper core more and the volume small.

Application range of MPO Optical Fiber jumper

MPO is used in LAN wiring optical active equipment between different buildings of enterprises, optical links interconnect communication in base stations, wiring in wiring boxes in residential areas, computer rooms in industrial parks, computer rooms in commercial buildings, optical signal connections in buildings densely wired optical fiber communication systems, cable television networks, telecommunications network local area networks (LANs), wide area networks (WANs), FTTx.

MPO jumper should pay attention to the following points during the cabling process:

1. The optical fiber jumper should avoid opening the dust cap before docking. Do not remove dust caps from adapter interfaces that have been connected to the adapter panel and have not yet been docked.

two。 In addition to normal docking, do not let the connector grinding end face contact or scratch with any other object.

3. If there is foreseeable end face dirt, try to use special cleaning tools or anhydrous ethanol soaked dust-free paper for cleaning, do not use paper towels, cotton wool, ordinary cotton swabs and other items for end face cleaning.

4. When docking the connector, make sure that the connector positioning key extends the axial insertion of the adapter or socket panel, and cannot be plugged repeatedly when the end face cannot be seen.

When the 5.MPO connector is inserted into the adapter, hold the tail sleeve of the connector and the shell of the connector when it is pulled out.

6. When bending the cable, keep the bending radius equal to or greater than 20 times the outer diameter of the cable.

7. When bundling the cable, the tightness should be maintained properly, and the outer skin of the cable should not be seriously deformed.

8. When piercing the cable and piercing the pipe, it is operated by pushing and pulling at the same time, and do not drag or push the cable vigorously to prevent scratching and causing the cable to break skin or break.

Common MPO fiber jumper types:

Nowadays, the research and development of MPO optical fiber jumper and the application in practical engineering play an important role and significance, and it is widely used in daily life, which greatly improves the popularity of optical network. The above MPO optical fiber jumper types are provided by Yi Tianguang Communication. Each optical fiber jumper has gone through a strict quality inspection process, including end face inspection, insertion loss-return loss and 3D interferometer detection. Thank you for your support!

Recommended: 100g QSFP28 optical module

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.