Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, link2sd instructions, link2sd many people do not know, now let's take a look at it!

Many users don't know that Llink2sd is actually a good thing. Because ink2sd can increase the memory of mobile phones, the lack of memory of mobile phones can be well alleviated, so this link2sd? How to set it up? let's take a look at the setting method of Bian Shaw.

1. Storage card partition:

Set up graphics tutorials in link2sd

(1) use the software: DiskGenius3.4.5_xyls2001

Software name: DiskGenius (disk repair tool) 4.6.2 Green Edition

Software size: 6.5m

(2) computer partition:

A: the memory card is connected to the computer (it is best to back up the contents of the memory card)

B: run DiskGenius, find your memory card letter on the left side of the interface, click OK with the left button, and then click Quick Partition above.

C: in the Quick Partition dialog box, select [Partition number] as 2, and select [Advanced Settings] as [FAT32]. [primary partition] check both. [drive letter 1] was later used as an ordinary memory card, called the system. [drive letter 2] is a partition used for mobile phone memory, called software. The size of the two drive letters depends on your own settings (my 8-gigabyte memory card is divided into 1 gigabytes for mobile memory). After that, the partition will be started.

Mobile phone link operation

Set up graphics tutorials in link2sd

(note: this method only uses this software, and your phone must be root, regardless of the system version above 6005.)

(2) Operation steps:

Put the partitioned memory card back to the phone and install [link2sd1. 6. 0 Chinese version]

B: run [link2sdv 1. 6. 0 Chinese version], hanging in the second partition of the SD card, the option to select system partition 3354 appears. Select [FAT16/FAT32] 3354 and the phone will be turned off automatically. Just restart the phone.

C: run [link2sdv 1. 6. 0 Chinese version], the program you installed will be read. Select program 3354 [create Link] and the program will be moved to the second partition of the SD card.

D: finally, you can set the Chinese version of link2sdv 1. 6. 0], select "Auto Link", and all installed software will be automatically moved to the SD card.

Pay attention to a few points

1. In the future, the SD card can only be unplugged when the computer is turned off. Otherwise, the software may be gone and have to be redone. I suggest you connect your computer with a data cable.

two。 In the partition, many forum methods are divided into EXT2. Why are we FAT32? There are two reasons. First, EXT2 can be watched by mobile phone, but not by fat people. There's no difference between the others. Second, the division of fat is relatively stable.

3. Although there is a conflict or consistency between this post and the post of the great god in the forum, the great gods have seen that there is no need to pat bricks, but only such details as the novice writes to the novice.

Link2sd can alleviate the problem of insufficient memory. If users need to know about this, take a look at some of the above introductions and try to set it up.

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.