Shulou(Shulou.com)06/01 Report--

The main content of this article is to explain "how to install Linux Arch is better", interested friends may wish to have a look. The method introduced in this paper is simple, fast and practical. Next let the editor to take you to learn "how to install Linux Arch better" bar!

Before installing Linux Arch, you should decide which installation method to use. Linux Arch provides a bootable ISO image for CD-ROM installations, as well as FTP installations based on floppy disk images. You can also download an ISO image of only about 200 megabytes, which includes only a collection of base and kernel packages, and everything else is the same.

If you don't have a CDROM drive, you'll naturally have to install it on a floppy disk and FTP. Otherwise, you can use the Linux Arch installation CD. You can download and burn an ISO image from one of the mirrors listed below; if your dial-up link is bad, you can have someone else burn one for you; or if you don't have a burner, you can buy a CD from OSDisc, which is shipped almost all over the world.

You can also use CD for FTP installation, floppy disks are usually used only as a method, because it will be a painful and slow process, and the disk can be easily damaged. In addition, you don't have to worry about using an older version of the ISO image for installation, because once you have a base system, upgrading to the current version will be easy unless you don't have broadband. Dial-up connections that use the PPP protocol during installation are not currently supported because the required pppd daemon and ISDN tools are not included in the root disk image.

Your local area network must have a gateway connected to the Internet and can handle all requests during installation to ensure the success of the FTP installation. Of course, you can also set up a FTP server for installation on the network. The point is, you can't add Modem to your computer, and then use the installer to dial up the Internet through it, which won't work. The friendliest installation method for beginners is to install the base system and the required software from the CD, and then when you have established an Internet connection, comprehensively upgrade the system and add the software you need.

Another thing you should know before installation is that during installation you will be asked about hard disk partitions, loaded modules, and confirmation of important system file changes, such as lilo.conf and rc.conf. Here, the installer will not teach you all the settings hand in hand, you need to know how to choose. This is important for beginners, and if it scares you already, finish reading this document so that you will at least have some idea of the question you are about to be asked. If you don't quite understand it before you mess with your system, go to IRC, forum, or find a good person in the neighborhood. You'll probably have to go through a lot of trouble before the installation is complete, don't say I didn't warn you. It should be said that it doesn't seem to be that bad:)

At this point, I believe you have a deeper understanding of "what method to install Linux Arch is better". You might as well do it in practice. Here is the website, more related content can enter the relevant channels to inquire, follow us, continue to learn!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.