Shulou(Shulou.com)06/01 Report--

First, the equipment model AIR-CAP16021-C-K9 to be upgraded this time

Second, set up the IP address of the computer and prepare the TFTP: set the computer IP to 10.0.0.2TFTP server using solarwinds 10.9.1.33.

Third, connect the Console line and view the port of the Console line

4. Use to set serial port parameters as follows

Download the fat AP IOS file of 1602I at http://down.51cto.com/data/1897579

The IOS used in my AP is downloaded from 51CTO. For other models of AP, please download the corresponding IOS file.

6. Modify the suffix of the image file to Default and place it in the TFTP root directory (key step)

The name of the image file must be this: ap1g2-k9w7-tar.default. If it is not the file name, an error will be reported as follows:

% Error opening t ftp://255.255.255.255/ap1g2-k9w7-tar.default (no such file or directory) ap:

The IP address must be set to this network segment of 10.0.0.0Make8, because the default IP address used for AP upgrade is 10.0.0.1

Press and hold the reset button in the case of a power outage, insert the power supply, press and hold Reset for about 20 seconds, after the following prompt appears, you can release it, and then AP will upgrade automatically

IOS Bootloader-Starting system.

FLASH CHIP: Micron N25Q256

Xmodem file system is available.

Flashfs [0]: 33 files, 9 directories

Flashfs [0]: 0 orphaned files, 0 orphaned directories

Flashfs [0]: Total bytes: 31936000

Flashfs [0]: Bytes used: 16559616

Flashfs [0]: Bytes available: 15376384

Flashfs [0]: flashfs fsck took 15 seconds.

Reading cookie from SEEPROM

Base Ethernet MAC address: 18:e7:28:1a:2a:c7

* loopback_mode = 0

Button is pressed, wait for button to be released...

Button pressed for 21 seconds

Process_config_recovery: set IP address and config to default 10.0.0.1

Process_config_recovery: image recovery

Image_recovery: Download default IOS tar image t ftp://255.255.255.255/ap1g2-k9w7-tar.default

Examining image...

Extracting info (288 bytes)

Image info:

Version Suffix: k9w7-.153-3.JAB

Image Name: ap1g2-k9w7-mx.153-3.JAB

Version Directory: ap1g2-k9w7-mx.153-3.JAB

Ios Image Size: 1290752

Total Image Size: 11387392

Image Feature: WIRELESS LAN | LWAPP

Image Family: AP1G2

Wireless Switch Management Version: 8.0.72.236

After about five minutes of brushing the machine, you can enter the system

* Mar 1 0000 System restarted 38.027:% SYS-5-RESTART:

Cisco IOS Software, C1600 Software (AP1G2-K9W7-M), Version 15.3 (3) JAB, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2014 by Cisco Systems, Inc.

Compiled Tue 02-Sep-14 20:36 by prod_rel_team

* Mar 1 00 SNMP agent on host ap is undergoing a cold start 00 8. 027:% SNMP-5-COLDSTART:

* Mar 1 0000 Line protocol on Interface BVI1 38.955:% LINEPROTO-5-UPDOWN: changed state to up

* Mar 1 0000 Line protocol on Interface Dot11Radio0 38.959:% LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down

* Mar 1 0000 Line protocol on Interface Dot11Radio1 38.959:% LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down

Ap >

9. Enter the system

Ap > en

Enter password Cisco

10. Next, you can configure it. We can configure the management address of AP under CLI, and then enable HTTP management.

11. Configuration process (brief)

Backup configuration file copy flash:/config.txt t ftp://192.168.58.158 backup completed, properly.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.