Shulou(Shulou.com)06/02 Report--

How do I use a brother printer? I believe that many inexperienced people are at a loss about this, so this article summarizes the causes and solutions of the problem. Through this article, I hope you can solve this problem.

Photocopying method:

1. Open the cover of the photocopier, the side to be copied is facing down, the paper head is facing right, put it in the lower right corner of the glass plate, and close the lid.

2. Press the "number of copies" button on the printer, press the right arrow key to increase the number of copies (press and hold for three seconds to increase the number of copies), and the left arrow is the number of reduced copies.

3. Press the "shallow / depth" button, and then press the left arrow to lighten to level 2 (save toner and speed up). Press "Kairu Xerox"

5. Put the paper blank on one side of the copy face up, head in, and put it flat into the paper place. Repeat steps 1 and 4 to copy the second side. 7. Make only one copy, but only press steps 1 and 4.

Printing method:

1. Click the "Preview" document first to see if the print meets the requirements.

2, when printing, click the "File" menu, click "print", A, set the print "page range" to the desired on the left side of the pop-up window (otherwise the entire contents of the printed document will be wasted). B. Set the number of copies on the right. C, non-important documents, when you want more than one, click "Properties" and select "Economic Model". D, you can click "manual duplex printing"

3. Click "OK" at the bottom of the window to start printing to see if the print meets the requirements.

4. when printing on both sides, also follow the prompts to take out the printed paper (for example, press 1, 3, 5 from top to bottom on more than one piece of paper? Rearrange the order), the blank is facing up, head in, and then put into the paper place. Then click OK in the pop-up window.

Press the "cancel" button immediately when printing and copying errors. Press the "OK" key to continue when you put in the paper after it is out of paper.

Turn off the left rear power switch and turn it back on if necessary. ? You can print a copy first.

Don't move the paper jam, pry it indiscriminately to avoid damage.

After reading the above, have you mastered how to use the brother printer? If you want to learn more skills or want to know more about it, you are welcome to follow the industry information channel, thank you for reading!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.