Shulou(Shulou.com)06/01 Report--

Recently, I have done an experiment in which ipxe starts PE through iscsi, and now I put it here for your reference.

I will not talk about the principle of pxe startup, those who are interested can go to Baidu to have a look.

First, we need to prepare several things.

Of course, I will give you the software, at the end of the article.

1,tiny pxe server

Tiny PXE Server is a small and powerful web startup software. Supports multiple protocols such as DHCP TFTP HTTP BINL DNS, supports multiple guides such as grub4dos,pxelinux,ipxe, supports boot from PXE/gPXE/IPXE, and can also be launched through http protocol.

2, a pe that supports iscsi

3, and the most important thing is the iscsi server (openfile)

I have already put down the software.

You can refer to this for the installation of iscsi server

Http://www.cnblogs.com/jankie/archive/2011/06/06/2073748.html

Iscsi configuration.

Hey, download the following pdf. There are detailed instructions in the 12 chapters.

All right, whether the configuration is right or not, the next step is very simple.

First, open the iscsi initiator

Then connect to the iscsi server we just configured

AHA, someone asked me how to connect?

All right, let's get to the point. We're connected. Is it right?

Now, there will be an extra disk on our computer.

Then obediently decompress the pe downloaded above into it.

And then the part about openfile and pe is over.

Thank you

Is it very gou (pi)?

But it doesn't matter, there is still a very important configuration missing!

High energy ahead!

Did we just have a thing called tiny pxe server, which is now useful?

The software looks something like this.

First of all, don't panic. We have to change a little bit before we can.

Open this file and open it in notepad

And then find: bootsan this place

And then change it to the picture above.

Pay attention

You need to change a place.

Sanboot iscsi:iscsi server ip:: port number (usually 3260):: iqn produced by your iscsi

Example:

Sanboot iscsi:192.168.1.1::3260::iqn-abcdefg

By the way, you can watch iqn here, and then you can copy it directly.

This will be fine.

The great task has been completed

To spread flowers.

Then let's try to start it.

open

Then power on, select the network to start.

And then you can see this interface.

And then we choose the first one.

Start pe perfectly

That's right

The required software and documentation are here.

Http://pan.baidu.com/s/1pKQRP7H

Thank you for watching!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.