In addition to Weibo, there is also WeChat
Please pay attention
WeChat public account
Shulou
2025-03-30 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Servers >
Share
Shulou(Shulou.com)06/02 Report--
Power supply failure phenomenon
1. Connect the power cord and the power lamp is not on
2. Power LED alarm
3. The power lamp is normal and there is no response if you press the boot button.
Troubleshooting method:
1. Check whether the contact of the power cord is loose
2. Test of replacement power supply
3. Detection of power supply environment (whether there is voltage instability)
4. View the event log
Motherboard failure phenomenon:
1. Press the boot button is invalid, black screen
2. the device starts normally and connects to the black screen of the monitor.
3. Some interfaces or slots of the equipment are connected with accessories, which can not be turned on.
CPU failure phenomenon
1. Pressing the boot button is invalid and the screen is black.
2. Automatic restart of the device
3. The equipment goes down innocently
Troubleshooting method:
1. Detect CPU installation problems
2. Replace CPU
3. Check the environment (fan and temperature)
4. View the event log
Memory failure phenomenon
1. Pressing the boot button is invalid and the screen is black.
2. Power-on card self-test
3. The memory of system recognition becomes smaller.
4. Restart the device without any downtime.
Investigation mode
1. Reseat the memory and clean the gold finger of the memory.
2. Replace memory detection
3. Memory insertion detection
4. View the event log
Hard disk failure phenomenon
1. Boot into BIOS
2. The system does not recognize the hard disk.
3. Do not enter the system cursor blinking
4. Restart the device without any downtime.
Troubleshooting method:
1. Start sequence detection
2. Replace the hard disk or detect the interface of the replacement hard disk
3. Detection of raid card settings
The device is not powered on (power, motherboard, CPU)
Card hardware self-test (memory, expansion card)
Boot into BIOS (hard disk, boot item)
Centralized management
Network awakening
First, the computer monitor does not prompt, the keyboard and mouse display light is not on, the fan rotates, open the main chassis to wipe the memory bar and try again, a long time, may enter some ash layer, if not return to the factory self-test BIOS
Second, if the server cannot be started, it cannot enter the interface and cannot be started when it comes to DHCP. You can try to restart after power outage.
Third, reflect the memory problem through the phenomenon
Unplugging the memory and reseating cannot be resolved. The error is that all installed memory cannot be accessed. The system shuts down. I haven't installed the system yet. New machine.
Memory error, error memory is located in the third memory of memory board 3. It is recommended to minimize the memory of each of the two memory boards, and then use the replacement method to detect the memory after the machine does not report an error.
Solution:
1. Unplug the memory board 1 (a set of memory boards)
2. Replace the memory
Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.
Views: 0
*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.
Continue with the installation of the previous hadoop.First, install zookooper1. Decompress zookoope
"Every 5-10 years, there's a rare product, a really special, very unusual product that's the most un
© 2024 shulou.com SLNews company. All rights reserved.