In addition to Weibo, there is also WeChat
Please pay attention
WeChat public account
Shulou
2025-03-29 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Servers >
Share
Shulou(Shulou.com)06/02 Report--
G76 represents the precision boring cycle.
Cdn.sohucs.com/p_w_picpaths/20171117/fcd6f255fa7744d48e30e9fea3b9a904.jpeg ">
The specific use format is as follows. G76 X__Y__Z__R__Q___F__
XYZ represents the corresponding axis coordinate value. The starting point of R tool. Q represents the lead-out distance. F represents the feed speed.
The actions performed are as follows. The tool is quickly lowered to the R point. Cut the Z-coordinate position of the feed hole. Then the spindle will stop. Return the knife Q. Then quickly move to the R point. Spindle positive (in G99 state)
G87 represents the reverse boring cycle.
G87 X_Y_Z_R_Q_F_
XYZ represents the corresponding axis coordinate value. The starting point of R tool. Q represents the tool exit distance (tool offset). F represents the feed speed.
After the cutter is quickly positioned in XY coordinates. The spindle must stop. Tool offset Q distance. Then quickly cut to point R at the bottom of the hole. In the reverse offset Q distance, the spindle forward, cutting to the Z point. Then the spindle will stop. Return to Q distance. Quickly return to the starting point. And then the spindle turns forward. The cycle is over.
G74 left spiral cutting cycle
It is described as follows
The format is as follows
G74 X_Y_Z_R_F_
The G84 tapping cycle (G84) is the opposite of the G74.
G84 X_Y_Z_R_F_
In the G99 state. The tap is quickly positioned to the R point, and the spindle is passed forward to z. Then the spindle is reversed to point R. Then the cycle ends.
The article comes from CNC numerical control technology blog http://www.quan6688.com/post/133.html
Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.
Views: 0
*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.
Continue with the installation of the previous hadoop.First, install zookooper1. Decompress zookoope
"Every 5-10 years, there's a rare product, a really special, very unusual product that's the most un
© 2024 shulou.com SLNews company. All rights reserved.