Shulou(Shulou.com)06/02 Report--

Win10 x64 Enterprise Edition system is installed and interconnected with the host

I. VM virtual machine resources, enterprise version and password cracking software, you can trust me privately, I will send you the link.

II. Introduction to VMware Workstation

III. Install Win10 x64 Enterprise Edition environment in VMware Workstation

IV. Interconnection with host computer

VMware Workstation (Chinese name "Weirui Workstation") is a powerful desktop virtual computer software, which provides users with the best solution to run different operating systems on a single desktop at the same time, and to develop, test and deploy new applications. VMware Workstation can simulate a complete network environment on a physical machine, as well as a portable virtual machine, which has better flexibility and advanced technology than other virtual computer software on the market. For IT developers and system administrators in enterprises, VMware has become an indispensable tool for virtual networks, real-time snapshots, dragging shared folders, supporting PXE and so on.

As shown in the figure:

Win10 x64 system virtual machine

As shown in the figure:

Open VMware Workstation, click to create a new virtual machine, select customize, and click next.

As shown in the figure:

Hardware compatibility option: Workstation 14.x, click next. (Win10 systems are not supported in versions prior to 10)

As shown in the figure:

Install the client system: click the installer CD image file and select Win10 x64. Image file (you need to download it in advance)

As shown in the figure:

Easy installation system: click next

As shown in the figure:

Easy installation system: click Yes, after the new virtual machine, we will activate Win10 x64 Enterprise Edition.

As shown in the figure:

Name the virtual machine: first create a new folder in your other disk, fill in the name, choose a path that does not allow Chinese, the space of the Chinese input method does not count as two Chinese bytes, do not install it on disk C will affect the speed of the virtual machine, it is best to put it in a mechanical disk or solid state, under the folder you created in other hard drives.

As shown in the figure:

Firmware type: Win10 selects UEFI (E), UEFI is a safe boot, Win7 is not recommended, Win7 can choose BIOS.

As shown in the figure:

Processor configuration: right-click my computer, manage, select device Manager, and click the processor to view the configuration.

Virtual machine memory: 2048MB is enough, not too much.

As shown in the figure:

Network type: bridging network: other people's virtual machines and outsiders can connect to your virtual machine, NAT: your virtual machine can be connected to your host, host mode network: your virtual machine can only be connected to your host.

As shown in the figure:

Select the type of Icano controller: select the LSI LOGIC recommendation.

As shown in the figure:

Select the disk type: SCSI is commonly used on servers. You can choose it.

As shown in the figure:

Select disk: choose the first one, just an upper limit that won't really take up so much memory, existing virtual disk: you've created a disk before and you want to use it again, physical disk: you give the virtual machine as much memory as it really takes.

As shown in the figure:

Specify disk capacity: 60GB is fine

As shown in the figure:

Specify disk file: select your previous path and put it below for later deletion.

As shown in the figure:

Create a virtual machine: finish and wait patiently.

As shown in the figure:

three。 Interconnect with the host computer

Activate Win10 x64: drag the downloaded software OEM10 from your host directly to the virtual machine.

The file cannot be dragged in and click VMtools.

As shown in the figure:

Open the software and click activate:

Add a desktop icon:

Check the IP address of your virtual machine

As shown in the figure:

Turn on your virtual machine and choose host-only mode:

As shown in the figure:

Open the network sharing center of your virtual machine, click change the setter settings, and click on the properties of your Internet0. Then check your properties and set an IP address.

Open the network center of your host and open the properties of VMnet1.

Turn on the firewall of your virtual machine and turn it off.

Your virtual machine will communicate with the host computer.

The above is the interworking between the virtual machine and the host.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.