Shulou(Shulou.com)06/01 Report--

The following will give you an introduction to the method of V9.x starting U disk production under load balancing. I hope it can bring some help to everyone in practical application. Load balancing involves more things, there are not many theories, and there are many books on the Internet. today, we will use the accumulated experience in the industry to do an answer.

Environment:

1) Vmware virtual machine (my version is V10.0.4)

2) v9.x image (mine is BIGIP-9.3.1.37.1.iso, image download address: https://downloads.f5.com/esd/productlines.jsp,F5 official website download, you need to register an account, details)

Operation procedure:

1. Create a F5 v9x virtual machine, and set the boot of the boot CD drive. The image ISO is v9x.

2. Boot the virtual machine, insert the U disk, and let the virtual machine recognize the U disk. Pay attention to the lower right corner of the virtual machine. If you recognize the U disk, the disk icon is lit up, and if not, it is gray.

3. Enter when Terminal type [vt100] appears

4. Interface selection: Transfer softwrae to USB device, enter

5. Enter y and enter in the remaining steps (the time required for this step is about 5-10 minutes). There is no need to operate. When the process is completed, you will return to the interface of step 4, then you can unplug the USB drive and start it successfully.

After reading the above introduction on the method of starting USB disk production under load balancing-V9.x, if there is anything else you need to know, you can find out what you are interested in in the industry information or find our professional and technical engineer to answer it. Technical engineers have more than ten years of experience in the industry. Official website link www.yisu.com

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.