Network Security Internet Technology Development Database Servers Mobile Phone Android Software Apple Software Computer Software News IT Information

In addition to Weibo, there is also WeChat

Please pay attention

WeChat public account

Shulou

The method of replacing memory Bar in Notebook computer

2025-01-18 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Internet Technology >

Share

Shulou(Shulou.com)06/02 Report--

This article is to share with you about how to change memory sticks on laptops. The editor thinks it is very practical, so share it with you as a reference and follow the editor to have a look.

Notebooks can be replaced with memory slips. Replacement method: 1, remove the notebook battery, open the computer shell; 2, open the buckle next to the memory bar, the memory bar automatically pops up, and then take it out; 3, press down the gap on the prepared memory bar to the bulge on the memory slot, and install it at the sound of "click".

Replacement method:

1. Remove the notebook battery to prevent the memory slot from burning out when the memory strip is installed (be very careful).

2. When opening the computer shell, it is generally fixed by screws, but it should be noted that some notebook screws are locked and cannot be taken off the shell, so you don't have to unscrew them, just loosen them.

3. Notebook memory bars are installed in different locations, so we look at their own notebook memory locations, such as the following picture is the memory bar

4. It is easy to take off the memory bar. Place it in the box below and peel it out.

5. The memory stick will pop up automatically.

6. Now all you have to do is install the prepared memory bar, press the gap in the memory bar against the bulge on the memory slot, and install it at the sound of "click".

7, after the installation, do not install the rear shell, boot to see if it can be turned on, whether it is the size of your own installed memory. (my computer-right-click-Properties)

8. If everything is normal, the rear shell can be installed, the power will be cut off after the computer is turned off completely, and the rear shell can be installed.

Thank you for reading! This is the end of this article on "how to change memory bars for notebook computers". I hope the above content can be of some help to you, so that you can learn more knowledge. If you think the article is good, you can share it for more people to see!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.

Views: 0

*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.

Share To

Internet Technology

Wechat

© 2024 shulou.com SLNews company. All rights reserved.

12
Report