Shulou(Shulou.com)06/01 Report--

In this article Xiaobian for you to introduce in detail "what are the practical aids of PS", the content is detailed, the steps are clear, and the details are handled properly. I hope that this article "what are the practical aids of PS" can help you solve your doubts? let's follow the editor's ideas slowly to learn new knowledge.

1. Tools / raw materials

Adobe Photoshop CS6 software

two。 Mind map

3. Tips

3.1 how to adjust the screen mode flexibly?

Select View-> screen mode in the menu bar, which will appear in three modes: standard screen mode, full-screen mode with menu bar, and full-screen mode. The specific location is shown in the following figure:

Note:

The main results are as follows: (1) We can use the shortcut key F to switch screen mode flexibly. For example, when we switch to full-screen mode, it is easy for us to watch, and if we are proficient in PS shortcuts, we can directly operate images in full-screen mode. The effect of full-screen mode is shown below:

(2) We can also adjust the screen display mode on the PS toolbar. Click the following location, and you can switch the screen mode at will, as shown in the following figure:

How is the extra content displayed in 3.2PS?

Select View-> display additional content (shortcut key Ctrl+H) in the menu bar, which refers to the contents of the display, as shown in the following figure:

Note: we often use grids or guides. For example, we can use grids as drawing references and mapping coordinates to provide accurate positioning. The specific effect is shown below:

How to use the ruler in 3.3PS?

Select View-> ruler (shortcut key Ctrl+R) in the menu bar, and click OK, and the specific effect is as follows:

Note:

(1) the ruler is mainly used to measure the position. We can right-click on the ruler to change the desired unit. At present, the unit I choose here is centimeters. Through the ruler, we can confirm where it is and which location is specific. The effect is as follows:

(2) the default upper left corner is the zero point, and the upper left corner goes to the right, and the value is getting larger. Similarly, the value of going down is also getting larger. We can also customize the desired zero, we can click on the small gray block in the upper left corner, click on that small gray block is not loose, then it will become a crosshairs, and then we are dragging the crosshairs to which position we want. At this point, the position becomes zero.

(3) double-click the upper left corner to restore the original zero point.

(4) the ruler is a very useful gadget, for example, if some pictures are very strict with the position, then the ruler must be used.

(5) rulers are often used in conjunction with guides. Flexible use of these two gadgets will make your picture position more accurate.

How can guides be used in 3.4PS?

Select View-> New Guide in the menu bar, and click OK, and the new guide will pop up. The effect is as follows:

We can adjust the orientation we want, there are two kinds are horizontal and vertical. After selecting the vertical reference line, fill in the position of 10 cm, and then we can generate a vertical reference line in the corresponding position. The specific effect is as follows:

Note:

(1) We can also click on the ruler first, and then pull out the reference line of our desired position to the corresponding position.

(2) hold down the alt key and click on the horizontal reference line, it can become a vertical reference line, if you choose a vertical reference line to click, it will become horizontal.

(3) We can select the move tool (shortcut key V) to move the guide line.

(4) if you don't want the guide to move, then we can select the lock guide (shortcut key Ctrl+Alt+;) on the view menu so that the guide will not be moved.

(5) if we want to delete the guide, then we can pull the guide back to the position of the ruler, thus deleting the guide.

(6) if you do not want to display guides, you can use the above mentioned to hide the extra content, the shortcut key is Ctrl+H.

How to align layers in 3.5PS?

In the menu bar, select View-> alignment (shortcut key Ctrl+Shift+;). The specific alignment methods are as follows:

With the alignment operation, we can quickly align the layers to the guides. Without this point alignment feature, it is not so easy to align multiple layers on the same guide, so this alignment feature is very helpful for those precise operations.

How to recover in 3.6PS?

Select File-> restore (shortcut key F12) in the menu bar, and the document will be restored to its original form. One advantage of recovery is that it will not lose the previous history record, and if we usually use this operation to delete the history record, the previous record will be deleted.

4. Keyboard shortcuts covered in this article

(1) switch screen mode: F

(2) display additional content: Ctrl+H

(3) ruler: Ctrl+R

(4) Lock guides: shortcut key Ctrl+Alt+

(5) Mobile tool: v

(6) alignment: Ctrl+Shift+

(7) recovery: F12

After reading this, the article "what are the practical aids of PS" has been introduced. If you want to master the knowledge of this article, you still need to practice and use it yourself to understand it. If you want to know more about related articles, welcome to follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.