Shulou(Shulou.com)06/02 Report--

Operating device information:

Source server: DELL R710 server, 3 disks Raid5, 2 disks Raid1, 1 disk hot backup, Windows2008 operating system.

Target server: DELL R730 server, 6 disks, no operating system.

Requirements description:

Due to the existence of special software in the user operating system, it is necessary to migrate as a whole. Now you need to migrate from the Windows2008 operating system-source server DELL R710 to the target server DELL R730. Due to the hardware difference between the target server and the source server, it cannot be migrated directly.

The specific operation forms are as follows:

First, use Winhex for system replication

Turn off the power of the source server and the target server, disassemble 6 disks of the source server and 6 disks of the target server, mark the disk number, and insert it into the system replication server. Use Winhex to copy the system at the same time, as shown in the following figure:

II. Dell R730 imports external Raid

Insert the copied target disk into the Dell R730 server, power on Dell R730, press CTRL+R to enter the Raid management interface as prompted, and import the external raid configuration I, as shown in the following figure:

Third, inject the H330_H730 driver

Download the H330_H730 driver from the dell official website, download the win system driver injection tool, use the u disk to make the pe boot disk, put the downloaded win system driver injection tool and H330_H730 driver into the u disk, power on the target server, enter the pe, and inject the H330_H730 driver through the win system srs driver injection tool. The specific operation process is as follows:

1. Open the tool win system srs driver injection, and select the third option to clear the driver.

Click next, select C disk windows in the system path. The driver path is default.

2. Injection driver

Select the second item

The system path selects the c disk windows folder, and the driver path selects the location of the downloaded driver folder.

Fourth, install the driver

After the injection driver is completed, restart the target server and enter the Windows2008 operating system to install the driver.

Note to install the driver:

1. Insert the network cable, first install the network card driver, according to the network card model.

2. Other drivers can be installed through the driver life or the driver wizard.

3. Finally, go to the device manager to verify that the driver is installed successfully, and restart. If the driver installation is not successful, the restart will cause the blue screen and the system cannot be started. After that, you can only re-mirror the target disk, inject the pe driver, enter the operating system, and install the driver.

Note: the pe level injection driver is temporary. After entering the operating system, you need to install the driver as soon as possible. Do not restart the device.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.