Shulou(Shulou.com)05/31 Report--

This article is about how to configure Suse xmanager. The editor thinks it is very practical, so share it with you as a reference and follow the editor to have a look.

1. / etc/X11/xdm/Xaccess file, remove the comments on this line.

# * # any host can get a login windows

-- become

* # any host can get a login windows

2. / etc/X11/xdm/xdm-config file, comment out the same.

"Display Manager .Requestport 0"

3./etc/opt/gnome/gdm/gdm.conf file, [xdmcp] section, change Enable to true and remove the comments from # Port=177

4. / etc/opt/kde3/share/config/kdm/kdmrc file, [Xdmcp] section, change enable to true and remove the comments from # Port=177

5. Check / etc/inittab to modify the runlevel to 5 (X11). If it is 3, you will not see the desktop, but the command line window.

Init 0 (halt, do not set it to the initdefault of the system)

Init 1 (single user mode, single user mode)

Init 2 (multiuser,without nfs, multiuser mode, without NFS)

Init 3 (Full multiuser mode, multiuser mode with NFS)

Init 4 (unused, reserved)

Init 5 (X11, graphical interface multi-user mode)

Init 6 (reboot, do not set it to the initdefault of the system)

Id:5:initdefault:

6. Turn off the firewall

Modify the firewall configuration file / etc/sysconfig/ipchains may be / etc/sysconfig/iptable

Add the following to the header of the file

# If you want to use GNOME/KDE, add the following line.

-An input-p udp-s 0ax 0-d 0max 0177-j ACCEPT

7. Reboot

Connection:

Open Xmanager-broadcast on the same network segment as Xmanager, and enter IP in Xbrowser across network segments.

Use Exceed XDMCP on the same network segment using broadcast mode (hosts can be automatically discovered), and use query across network segments.

XManager login xWindow,root users of SuSE cannot log in, other users can

The root login project in 1./etc/sysconfig/displaymanager needs to be set up-OK

DISPLAYMANAGER_ROOT_LOGIN_REMOTE= "no"

Change to DISPLAYMANAGER_ROOT_LOGIN_REMOTE= "yes"

2. Create a new file / etc/rc.config and add the following line: ROOT_LOGIN_REMOTE= "yes".

Thank you for reading! This is the end of the article on "how to configure Suse xmanager". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, you can share it for more people to see!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.