Shulou(Shulou.com)06/01 Report--

This article will explain in detail how to use pxe to achieve system cloning and batch installation. The editor thinks it is very practical, so I share it with you as a reference. I hope you can get something after reading this article.

Prepare a pxe server and set the IP address and subnet mask to 192.168.88.1Universe 16

Prepare a host that has installed the system and software and is about to be cloned

Connect the server and the cloned host to the same network

Open the pxe software and select the gho file at will, and click start Network Clone

Firewall alarm, allow access

Click stop to configure the software creation conditions

The cloned host enters BIOS, and in boot, the network startup is set to the first place, and f10 is restarted.

Enter ghost

Enter the callback name and select ok

When the backup is complete, create a new virtual machine, which requires that the configuration of the new virtual machine is the same as that of the cloned host, and connect the virtual machine and the server to the same network.

Enter the new virtual machine BIOS interface and select the network source installation

Restart the win10-5 virtual machine

After configuring all the hosts that need to be cloned, click send to start cloning the installation system, transfer is complete, and change BIOS-boot to priority hard disk.

On "how to use pxe to achieve system cloning, batch installation" this article is shared here, I hope the above content can be of some help to you, so that you can learn more knowledge, if you think the article is good, please share it out for more people to see.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.