Shulou(Shulou.com)06/01 Report--

This article is about how to configure WSR-320 Wechat and WiFi routing. I think it's practical, so I share it with you. I hope you can get something after reading this article. Let's take a look at it with the editor.

If you are a small and medium-sized business, want to make it easier for guests to use WiFi, instead of frequently asking for wireless passwords, want to promote their official account, want to take this opportunity to promote their products, want to get more senior regular customers, then WSR-320 will be your best choice.

WSR-320 Wechat with WiFi routing, 128m memory, 16m flash memory, 30 sets of standard capacity, dual antenna design, rate 300m, small shape but strong signal, using the fourth generation of intelligent QOS of Victoria League, support USB storage, support VPN function, support Wechat and WiFi, support Bluetooth peripheral shake, can be widely used in small and medium-sized supermarkets, hotels, hospitals, entertainment and catering industries.

This is a special marketing router for Wechat and WiFi, a powder inhaler that can be managed with a mobile phone APP. Customers only need to use Wechat to "scan" and instantly connect to Wi-Fi, and merchants can also push discount products and discount pages directly to Wechat's dialog box. What is the specific effect?

Let's talk specifically about how the WSR-320 Wechat and WiFi router is the business opportunity to configure Wechat and WIFI, and how users connect to the Internet through Wechat and WiFi, everything about Wechat and WiFi, and listen to me slowly.

[Wechat Public platform setup]

1.1 add Wechat with WiFi function

Log in to mp.weixin.qq.com, click "add feature plug-in", and add Wechat and Wi-Fi function; (both Subscription account and service number support this feature)

1.3. Add Devic

1.4 obtain third-party credentials

Click add, prompt to add successfully, get the store name, SSID, shopID, appID, secretkey and other parameters, and fill in this parameter in the router authentication configuration page.

1.5 bind as an administrator

After obtaining the third-party credentials, you can scan the code to become the administrator, and the administrator can modify the merchant page.

[WSR-320 Router Settings]

2.1 Authentication configuration

Go to the router management page "Authentication Management > Wechat and Wi-Fi" to configure, as shown below:

Status: enable disable featur

Port: the default parameter is not modified, and it is the port of the authentication page

User roaming time: within the roaming time after disconnecting WIFI, users can surf the Internet without authentication when they connect to WIFI again. Default is 15 minutes, which can be modified.

Store name, SSID, shopId, appId, secretKey: enter according to the parameters obtained on Wechat public platform

View users: click to view user information that is currently logged in or in roaming

2.2 Page configuration

Go to the router management page "Authentication Management > Wechat and Wi-Fi" to configure, such as the above figure 2.1Router authentication parameters configuration page. All pictures need to be uploaded to other servers in advance. The router can only fill in the image address.

Enable default configuration: if checked, the default page configuration is enabled, such as uncheck the page configuration that enables custom settings.

View Preview: click to view the preview image, as shown below:

Scroll image address: customize the address of the picture (automatically added to the whitelist)

Scroll picture link: the jump address when you click on the picture (automatically added to the whitelist)

Introduction title: introduction title

Introduction content: introduction content

Service Hotline: bottom WIFI Technical Service Hotline

Bottom picture address: bottom LOGO address (automatically added to whitelist)

Bottom picture link: jump address when clicking on the bottom LOGO (automatically added to the whitelist)

Jump address after verification: when using mobile verification code for verification, the address to be redirected after verification is completed, and this address is not redirected using Wechat and WIFI authentication (automatically added to the whitelist)

2.3 View user pages

Go to the router management page "Authentication Management > Wechat even Wi-Fi" to configure, as shown in the figure above. Click "View users" to enter the user management page.

MAC: MAC of the terminal

IP: the IP address of the terminal

Status: online, temporary and roaming:

Online: status after successful user authentication

Temporary: the status of a user who clicks the button "one button to open Wechat and Wi-Fi" but has not been successfully authenticated. This status will be maintained for up to 2 minutes.

Roaming: the status of a successfully authenticated user after leaving WIFI. The default is 15 minutes. During this roaming time, users do not need to authenticate again after reconnecting to WIFI.

Time: time that has been in the current state

Wechat openId: the openId returned by Wechat when using Wechat with WIFI verification

Telephone ID: the encrypted mobile phone number returned by Wechat with Wechat and WIFI authentication, and the WIFI service phone when authenticated with mobile phone verification code.

Action: click to delete this user. After deletion, this user needs to re-authenticate.

[Wechat and WiFi Certification process]

3.1 Wechat and WiFi Certification

It is recommended to use the latest version of Wechat APP to get a better Internet experience.

Make the certification process for the first time

Users select SSID to evoke the authentication page, click the "one button to open Wechat and Wi-Fi" button on the page to enter the front page of the connection, and click verify to surf the Internet (at this time, a whiteboard page may be displayed or there may only be text prompts for access to the Internet). The networking process is shown as follows:

Note: this process is the result of Wechat APP. Because Wechat is not compatible with different versions, there will be different authentication processes, which will not be followed when logging in again. This process will always be the same in the old version of Wechat APP.

Normal authentication process

Users select SSID to evoke the authentication page, click the "one button to open Wechat and Wi-Fi" button on the page to enter the front page of the connection, display the official account LOGO and name, click the "connect now" button and start to connect with WiFi. After a successful connection, jump to the successful connection page. Check the follow merchant official account by default, click "finish" and jump to the merchant page. The networking process is shown below:

3.2 connection process using mobile CAPTCHA

Users select SSID to call up the authentication page, click "Connect with mobile verification code" on the page, enter the WIFI service phone, click the "connect to the Internet" button, and then start to connect to WiFi. After the connection is successful, a prompt window pops up, and then jumps to the merchant page (this page is configured on the router management page). The networking process is shown below:

[revision of merchant page]

4.1 bind as an administrator

You can see the binding method in "1.5.bind as an administrator" in the document. You can also use the Wechat public platform to manage Wechat with WIFI > merchant's home page, and scan the code to become an administrator, as shown below:

Follow Wechat and WIFI Assistant to configure the merchant page, as shown below:

The above is how to configure WSR-320 Wechat and WiFi routing, and the editor believes that there are some knowledge points that we may see or use in our daily work. I hope you can learn more from this article. For more details, please follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.