Shulou(Shulou.com)06/01 Report--

Problem description

What are the recommendations for AC6005 wireless optimization

Solution

The optimization recommendation is for the wireless controller V200R006 version

1: Channel, power optimization

It is recommended that you use the automatic tuning feature of the device to allocate channel and power for AP (tuning time is set when the user is off duty, such as early in the morning) under the WLAN view:

[AC-wlan-view] calibrate enable schedule time 02:00:00

[AC-wlan-view] calibrate policy rogue-ap

[AC-wlan-view] calibrate policy non-wifi

[AC-wlan-view] calibrate sensitivity high

Regulatory-domain-profile name default

Dca-channel 5g channel-set 36,40,44,48,52,56,60,64149153157161165

Dca-channel 5g bandwidth 40mhz

2:RTS, CTS threshold

The threshold is set to 1400radio-2g-profile:

[AC-wlan-view] radio-2g-profile name default

[AC-wlan-radio-2g-prof-default] rts-cts-mode rts-cts

[AC-wlan-radio-2g-prof-default] rts-cts-threshold 1400

Radio-5g-profile:

[AC-wlan-view] radio-5g-profile name default

[AC-wlan-radio-5g-prof-default] rts-cts-mode rts-cts

[AC-wlan-radio-5g-prof-default] rts-cts-threshold 1400

3: low signal strength kicks users offline

Execute under rrm-profile:

[AC-wlan-view] rrm-profile name default

[AC-wlan-rrm-prof-default] smart-roam enable

[AC-wlan-rrm-prof-default] smart-roam roam-threshold check-snr

[AC-wlan-rrm-prof-default] smart-roam quick-kickoff-threshold snr 15

4: user speed limit

On, set up according to the actual demand

Configure under traffic-profile:

[AC-wlan-view] traffic-profile name default

[AC-wlan-traffic-prof-default] rate-limit client down 4096

[AC-wlan-traffic-prof-default] rate-limit client up 4096

5:edca parameter adjustment

Use dynamic edca

Rrm-profile name default

Dynamic-edca enable

6:beacon cycle

Suggested value: 160ms

Execute under radio-2g/5g-profile:

Beacon-interval 160

Increase in 7:beacon and probe resp rate

Execute under ssid-profile:

[AC-wlan-view] ssid-profile name default

[AC-wlan-ssid-prof-test] beacon-2g-rate 11

Reduced number of 8:probe-response retransmissions

Execute under ssid-profile:

[AC-wlan-view] ssid-profile name test

[AC-wlan-ssid-prof-test] probe-response-retry 1

9:short GI

Execute under radio-2g/5g-profile:

[AC-wlan-view] radio-2g-profile name default

[AC-wlan-radio-2g-prof-default] guard-interval-mode short

10: reduce STA aging time

Suggested value: 1min

Execute under ssid-profile:

[AC-wlan-view] ssid-profile name test

[AC-wlan-ssid-prof-test] association-timeout 1

11: remove the low rate set of 2.4G

More than 12m is recommended.

Radio-2g-profile name radio-2g-pro-3000

Dot11bg supported-rate 12 18 24 36 48 54

Dot11bg basic-rate 12 18

12: configure broadcast, multicast, unknown unicast suppression, and enable isolation (direct forwarding requires port isolation on the switch)

Traffic-profile name tra

User-isolate l2

Traffic-optimize broadcast-suppression packets 128

Traffic-optimize multicast-suppression packets 128

Traffic-optimize unicast-suppression packets 64

Traffic-optimize arp-proxy enable

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.