Shulou(Shulou.com)06/01 Report--

IBM X3250 how to install redhat linux, many novices are not very clear about this, in order to help you solve this problem, the following editor will explain in detail for you, people with this need can come to learn, I hope you can gain something.

There is a customer bought an ibm X3250 server and a set of genuine redhat linux es 4 software, asked us to help install the system, 3250 only two hard disk slots, so can only install two 3.5in hard disk, can do raid1 or raid0, install the hard disk is very simple, remove the lid on the panel to insert the hard drive, and then cover the lid on the line.

Then use server guide boot to do raid, but enter the configuration and installation operating system interface to find that there is only windows system. Direct use of the linux installation disk for installation, you can boot normally, but to install the disk drive will not be able to pass.

There is no way to start with Baidu, the introduction parameters of ibm x3250 clearly indicate that it supports the linux system, so I have to call ibm's 800800 telephone number to consult. The person who answered the phone was a little girl who reported the serial number of the machine and said that I encountered the situation. She said that the server guide disk of 3250 only supports the windows system. If you install the linux system, you should boot directly with the installation disk of linux and load the disk drive with a floppy drive. And asked my email to send me the relevant documents and software.

The ibm x3250 itself does not have a floppy drive. Fortunately, the company has two usb floppy drives to be sent to users, which are just in time to be used. Part of the following message:

1. To unscramble an img file using Rawrite:

1. Copy the rawrite.exe and the driver to the same directory (the following example is to copy to the root directory of disk c).

two。 In the Windows command prompt program, run cd\ to return to the root directory of disk C, and type rawrite enter, as follows:

C:\ rawrite enter

Enter disk p_w_picpath Source file name: enter the name of the img file and enter

Enter target diskette drive: enter an enter

Please insert a formatted diskette into drive A: and press-Enter-: enter

3. Until the C: logo appears on the screen

Note: the name of the file extracted by Rawrite is required to comply with the 8.3 principle. If it does not, rename it to the name that conforms to the 8.3 principle before decompression.

two。 How to make a driver floppy disk:

Note: quickly format the floppy disk before making the driver

Download the driver file to the root directory of C disk, double-click the running program file, and a DOS window pops up, as follows:

1. "Please enter a drive letter compatible with a 1.44m 3.5" disk, or press ESC to quit: "

Enter an and enter

two。 "Enter to continue:" Press enter

3. Press 14 to enter, and when you arrive at Page 15 of 15:00, "If you agree, type Y and press ENTER" will be prompted at the bottom of the program.

At this point, press "Y" to receive the protocol, and then press enter, and the following prompt appears:

4. "Insert a blank high density diskette in drive A: Press Enter to extract, or ESC to exit"

Insert a blank 1.44 "floppy disk at this time, enter, the program file begins to be decompressed to the floppy disk, and after the decompression is completed, press ESC to exit, and finish making the driver floppy disk.

1. Unlock 25k9226.tar.gz files with Winzip software

Copy rawrite.exe and the unzipped driver file uw10328.dd to the same directory (the following example is to copy to the root directory of disk c):

two。 In the Windows command prompt program, run cd\ to return to the root directory of disk C, and type rawrite enter, as follows:

C:\ rawrite enter

Enter disk p_w_picpath Source file name: enter uw10328.dd and press enter

Enter target diskette drive: enter an enter

Please insert a formatted diskette into drive A: and press-Enter-: enter

3. Until the C: logo appears on the screen, the driver floppy disk is made.

She sent me the file is rawrite32.exe, is the windows version, is the graphical interface, operation and simple, select the image file to determine you can automatically create a drive floppy disk, with linux CD boot, the floppy disk into the floppy drive, and then in the "boot:" after entering the "linux dd" will automatically load the disk driver and start to install linux, all the way back smoothly, I will not talk nonsense.

Is it helpful for you to read the above content? If you want to know more about the relevant knowledge or read more related articles, please follow the industry information channel, thank you for your support.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.