Shulou(Shulou.com)05/31 Report--

In this article Xiaobian for you to introduce in detail "xp system memory failure how to repair", the content is detailed, the steps are clear, the details are handled properly, I hope this "xp system memory failure how to repair" article can help you solve doubts, following the editor's ideas slowly in-depth, together to learn new knowledge.

First, there is no display when the computer is started.

This kind of failure due to the memory stick is generally caused by the poor contact between the memory bar and the motherboard memory slot, which can be solved by rubbing the gold finger back and forth with an eraser (do not clean with alcohol, etc.). There is memory damage or motherboard memory slot problems will also cause this kind of failure.

Due to the failure of boot without display caused by the memory stick, the host speakers generally beep for a long time (for Award Bios)

Second, the operation of windows system is unstable and illegal errors often occur.

This kind of failure is generally caused by the poor quality of the memory chip or software, if it is determined that it is the cause of the memory bar, there is only one way to replace it.

Third, the windows registry is often damaged without reason, prompting the user to restore it.

This kind of fault is generally caused by the poor quality of memory, which is difficult to repair and can only be replaced.

4. Windows often enters safe mode automatically

This kind of fault is generally caused by the incompatibility between the motherboard and the memory bar or the poor quality of the memory bar. It is common that PC133 memory is used on some motherboards that do not support PC133 memory bars. You can try to slow down the memory read speed within the CMOS settings to see if you can solve the problem. If not, you can only replace the memory bar.

5. Random crash

This kind of fault is generally due to the use of memory strips of several different chips, resulting in a time difference due to the different speed of each memory stick, which can be solved by reducing the memory speed in the CMOS setting, otherwise, only the same type of memory can be used. Another possibility is that the memory bar is not compatible with the motherboard, this kind of phenomenon is generally rare, and it is also possible that the computer randomly crashes caused by poor contact between the memory bar and the motherboard, this kind of phenomenon is more common.

VI. System resources will decrease with the increase of memory.

This kind of phenomenon is generally caused by the incompatibility between motherboard and memory. It is common that PC133 memory bars are used on some motherboards that do not support PC133 memory bars. Even if the system is reinstalled, it will not solve the problem.

7. When windows starts, the system indicates that there is something wrong with some addresses when loading the high-end memory file himem.sys.

This problem is generally caused by the damage of some chips in the memory bar. The solution can be found in the memory maintenance method below.

There is often a hint of insufficient memory when running some software.

This phenomenon is generally due to the lack of remaining space on the system disk, so you can delete some useless files and leave more space, which is generally kept at about 300m.

9. From the hard disk boot installation of windows to the detection of disk space, the system indicates that there is insufficient memory

This kind of failure is generally due to the fact that the user has added the emm386.exe file to the config.sys file, which can be solved by blocking it.

10. An illegal error occurred when installing windows to configure the system

This kind of failure is generally caused by the damage of the memory bar, which can be solved according to the memory maintenance method, if not, then the memory stick can only be replaced.

11. The system automatically restarts many times when starting windows

This kind of fault is generally caused by memory or power quality problems, of course, the system restart may also be caused by poor CPU heat dissipation or other man-made faults, which can only be eliminated step by step by troubleshooting.

XII. Memory maintenance method

After the above failures, if the memory is damaged or the quality of the chip is not good, if the conditions do not allow you to remove the chips on one side of the memory with a soldering iron to see if you can solve the problem, if not, you can replace and unload the chips on the other side until success (so that the welder is afraid that the person who needs to repair the phone can achieve it). Of course, if you have the condition to use an oscilloscope to detect it, you will get twice the result with half the effort). After using this method, only half of the memory is available because one side of the memory has been removed. For example, 64m still has 32m available, so there is no need for maintenance for small capacity memory.

After reading this, the article "how to fix the memory failure of xp system" has been introduced. If you want to master the knowledge points of this article, you still need to practice and use it yourself to understand it. If you want to know more about related articles, welcome to follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.