Shulou(Shulou.com)06/01 Report--

This article mainly introduces "how Linux loads raid drivers". In daily operation, I believe many people have doubts about how Linux loads raid drivers. Xiaobian consulted all kinds of materials and sorted out simple and easy-to-use operation methods. I hope it will be helpful to answer the doubts of "how Linux loads raid drivers". Next, please follow the editor to study!

To load the raid driver:

1. Start the CD to enter the installation interface, enter linux dd after boot: and press enter.

2. If the driver is incorrect, then prompt: Failed to mount drive disk

If the driver is correct, you will be prompted to load usb-storage. At this time, the driver is fully loaded.

3. Ask if you want to load the driver and select yes

4. Select sda devices usb devices are identified as scsi devices

5. Whether to load / dev/sda device and select ok

6. Enter the following figure and click ok

7. Select the driver you need and press ok

8. Whether to load additional drivers and choose no, so that the system can be installed normally

At this point, the study on "how to load the raid driver in Linux" is over. I hope to be able to solve your doubts. The collocation of theory and practice can better help you learn, go and try it! If you want to continue to learn more related knowledge, please continue to follow the website, the editor will continue to work hard to bring you more practical articles!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.