Shulou(Shulou.com)06/03 Report--

This article mainly explains "Summarize the solutions to Chinese and English error tips and countermeasures". The explanation in this article is simple and clear, easy to learn and understand. Please follow the ideas of Xiaobian and study and learn "Summarize the solutions to Chinese and English error tips and countermeasures" together!

Abort, Retail, Ignore,Fail?

[Chinese] Exit, retry, ignore, cancel?

[Cause] The command given was not recognized, or a disk or device error occurred that prevented the command from being executed, possibly a damaged disk or an open floppy drive door.

Press A to terminate completely and return to DOS prompt.

Press R to repeat the command.

Press I key to continue processing, ignore errors, very risky, do not recommend

Press the F key to stop executing the command in question and continue with the following process. Sometimes it's used.

Access Denied

[English] Access denied

[Cause] An attempt was made to open a file marked read-only, stored on a write-protected disk, or locked on a network. This message is also generated if you use the "Type" command on a subdirectory or the "CD (chdir)" command on a file.

[Solution] You should use the "Attrib" command to remove the read-only status of the file or remove the write protection from the disk, and then try again.

Bad Command or file name

[English] Wrong command or file name

[Cause] Unable to recognize incoming commands

[Countermeasures] You should check to make sure that the command you entered is correct and that the command file can be found in the specified directory or search path specified with the Path command.

[English] Boot error

[English] Guide error

[Cause] The expected peripheral was not detected during boot.

[Countermeasures] You should check the computer settings parameters, if the user can not solve this problem, please find a special maintenance personnel.

Cannot find system files

System file not found

[Cause] An attempt was made to load an operating system from a drive that does not contain system files.

[Solution] The sys command should be used to copy system files to the root directory. Unless you really can't recover system files, you can reformat the disk with Format/s.

Cannot load command, system halted

Unable to load command, system aborted

[Cause] The application overrides all or part of Command.com in memory.

[Countermeasures] You should reboot your computer, check that the data modified by the application is complete, and if necessary copy Command.com to a subdirectory where DOS can find Command.com when exiting the application.

Cannot read file allocation table

[English] Cannot read file allocation table

[Cause] The document allocation table is broken.

If you can still find some data, back it up to an empty disk, or repair the file allocation table with the Chkdsk command, and reformat the disk if necessary. If the problem recurs, the drive should be repaired or replaced.

Divide Overflow

[Chinese] allocation overflow, divide-by-zero error

[Cause] The program may be written incorrectly, not debugged well, or it may conflict with other programs in memory.

[Policy] Check other programs in memory or stop using this program.

Drive Not Ready Error

[English] Drive not ready

[Cause] The drive does not exist or the disk is not present.

[Solution] Check disk or replace disk.

Duplicate File Name or File Not Found

File name duplicate or not found

[Cause] The file name is duplicated with the existing file name or the file is not present at all when the file is manipulated.

Change the name or check the spelling of the file name.

Error loading operating system

[English] Boot OS Error

[Cause] The operating system file cannot be found or is corrupted.

[Solution] Use the SYS command to copy the operating system files to this drive, and if necessary, copy the config.sys and autoexec.bat files to the root directory.

If system files cannot be recovered, boot the system from floppy disk, backup the data, and reformat the disk with Format/s.

EXEC failure

[English] File execution failed

[Cause] The executable file of the application contains errors that affect processing, or the file cannot be opened because too many files have already been opened, and the file may not be compatible with the current version of DOS.

Check the DOS version, if the version is correct, you can fix this problem by editing the Files command in Config.sys.

File allocation table bad

[English] File allocation table corrupted

[Cause] Many reasons, such as virus outbreak, sudden shutdown, abnormal shutdown, etc. can destroy the allocation table.

Back up all the data you can find to an empty disk and do not overwrite previous backups. Perhaps you can fix this by quoting the Chkdsk command. If necessary, reformat the floppy disk. If the problem persists, send the drive for repair.

File cannot be copied onto itself

The document cannot copy itself.

[Cause] You specified the same file in both source and destination files, or forgot to write the file name.

Change the source or target file as needed and try again.

File creation Error

[English] File creation error

[Cause] There may not be enough space on disk for the file you want to create, the file you want to create already exists and is read-only, or you want to replace the file name with an already existing file name.

You can change the disk, use a different destination name, use a different destination location, or use the Attrib command to remove the read-only attribute of the file.

File not found

File not found

[Cause] No file was found in the current directory or any directory specified by the Path, Append command, or the specified directory is empty.

[Policy] Check the spelling and location of the file name, if you need to change the search path.

General failure

[English] General failure

DOS cannot determine the cause of the error, usually because the disk in the drive is not formatted or formatted as a non-DOS system.

[Response] The disk should be reformatted.

Incorrect DOS version

[English] DOS version does not match

[Cause] A different version of an external command was entered.

[Policy] Set the version with setver or use the correct executable file.

Insufficient Disk Space

[English] Not enough disk space

[Cause] There is no more space available on disk to copy files or create files.

You can delete some useless files or replace a larger disk.

Insufficiency memory

[English] Not enough memory

[Cause] There is not enough memory to process the commands entered by the user, usually referring to basic memory.

[Countermeasures] Some memory-resident files should be deleted or memory management optimized. You can also add more memory to the system to accommodate applications.

[English] Invalid directory

[English] Illegal Directory

[Cause] An invalid directory name or a directory name that does not exist was entered.

[Response] Check the spelling of the catalogue.

Invalid Drive Specification

[English] Invalid drive definition

[Cause] There is no such drive at all, probably a spelling error. If you can't specify an optical drive, you probably don't have a driver installed.

[Response] Reinstall the optical drive.

Invalid filename or file not found

Invalid file name or file not found

[Cause] The file name entered contains invalid characters or wildcards, or reserved device names are used as file names.

Try using different file names.

Invalid Media,track 0 Bad or Unusable

Invalid format, track 0 is corrupt or unavailable

[Cause] Usually disk damage.

[Response] Replace the disk.

Invalid parameter

[English] Invalid parameter

[Cause] No correct parameters are specified on the command line, or there are duplicate or prohibited parameters.

[Response] Check spelling or grammar as commands are entered.

Invalid partition table

[English] Invalid partition table

[Cause] Error in hard drive partition information.

[Countermeasures] Backup as much data as you can find and run Fdisk to reset the hard disk partition.

Invalid path,not directory,or directory not empty

[English] Invalid path, non-directory, or directory non-empty

[Cause] The system could not locate the specified directory, or the user entered a filename instead of a directory name, or the directory contained files (or subdirectories) that could not be deleted.

Check the spelling of the directory name, if the directory is empty, then it may contain hidden files, use the Dir/ah command to display any possible hidden files, change the attributes with attrib, delete them.

[English] Invalid syntax

[English] Invalid syntax

[Cause] The system cannot process the syntax format entered by the user.

[Response] Check the correct file format and try again.

No fixed disk Present

No hard drive.

[Cause] The system cannot detect the presence of the hard disk.

[Response] Check the driver class parameters set, if this problem cannot be solved, send it for repair.

Non-System Disk or Disk Error

Non-system disk or disk error

[Cause] The system cannot find system files in the current disk.

[Countermeasures] Insert a disk containing system files or reboot your computer.

Not enough memory

[English] Not enough memory

[Source] See Inadequate memory

[Response]

Not READY,READING DRIVE X

Drive X is not ready

[Cause] There is no disk or door open in the specified drive.

[Tips] Insert the disk into the specified drive or close the drive door.

Program too big to fit in memory

[English] Resize too large to load memory

[Source] See Inadequate memory

[Response]

Required Parameter missing

Missing the necessary parameters

[Cause] See Invalid Parameter

[Response]

Too many open files

[English] Too many open files

[Cause] Exceeds the number of open files specified by the system.

[Solution] Increase the maximum number in Config.sys file with Files command and reboot computer.

Unrecognized command in CONFIG.SYS

Unrecognized command in config.sys

[Cause] Command in Config.sys file not recognized when booting system

[Response] Edit the config.sys file to correct invalid lines.

Write fault error

[English] Writing Failure Error

[Cause] The system cannot write data to disk.

Remove the disk and try reinserting it. If it still doesn't work, run Chkdsk or Scandisk. If the disk can't be recovered, throw it away.

Write protect error

[English] Write protection error

[Cause] Write protection on disk

Remove the disk, remove the write protection, and try again.

Thank you for reading, the above is "summary of Chinese and English error tips and countermeasures to solve the content, after the study of this article, I believe that we have a deeper understanding of the summary of Chinese and English error tips and countermeasures to solve this problem, the specific use of the situation also needs to be verified by practice. Here is, Xiaobian will push more articles related to knowledge points for everyone, welcome to pay attention!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.