Shulou(Shulou.com)06/01 Report--

In this issue, the editor will bring you about what the ipv6 default routing address is. The article is rich in content and analyzes and describes it from a professional point of view. I hope you can get something after reading this article.

In IPv6, the address of the default route is:: / 0. Routers in some organizations generally set the default route to a router that connects to a network service provider.

The role of the default route is that when a router that knows how to reach the destination address is reached, the router will choose a valid route based on the longest prefix match.

The default route (Default route) is the route chosen by the router when no other route exists for the destination address in the IP packet. All packets whose destination is not in the routing table of the router use the default route.

The default route has the same command format as the static route. Just change the destination ip and subnet mask to 0.0.0.0 and 0.0.0.0. The default route is just special. No matter where your destination address goes, it throws your packet to the next hop.

Just as PC has a default gateway to connect to local routers, and the same is true on the Internet, many routers and switches have default routes to access networks that are not local.

Default route is a special type of route and an important part of IP routing. Knowing how and when to use a default route is essential for the correct network setup (installation).

The above is what is the ipv6 default routing address shared by the editor. If you happen to have similar doubts, you might as well refer to the above analysis to understand. If you want to know more about it, you are welcome to follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.