Shulou(Shulou.com)06/01 Report--

It is believed that many inexperienced people do not know what to do about how to cooperate with the router to set up computer static ip under the windows system. Therefore, this paper summarizes the causes and solutions of the problem. Through this article, I hope you can solve this problem.

Before setting up static ip in Windows XP, Windows 7 and Windows 8 systems, users need to know the default gateway address and dns server address of their network, which can be viewed on the router.

Step 1: get the default gateway and DNS server address

Note: if you are dealing with the broadband service with static IP address, that is, after you have handled the broadband service, the broadband operator has assigned you the IP address, subnet mask, gateway and DNS server address to you, then please read directly: the setting method in step 2.

The default gateway address on the computer is the router LAN port address (management address), which is generally identified on the back of the router, and can also be viewed in the router management interface. The common addresses are 192.168.1.1 and 192.168.0.1; after the router has dialed the Internet, the DNS server address can be viewed and recorded under the running status (system status) of the broadband operation.

Important: if the LAN port address of your router is 192.168.1.1, then the ip address on the computer is set in the range of 192.168.1.2-192.168.1.254; if the ip address of the router LAN port is 192.168.0.1, the ip address that can be set on the computer can only be one of 192.168.0.2-192.168.0.254.

This paper takes the Tengda wireless router as an example. If the address of the LAN port of the Tengda router is 192.168.0.1, the default gateway address in the computer is 192.168.0.1, and the IP address of the silent subnet mask is 255.255.255.0. The IP address ranges from 192.168.0.2 to 192.168.0.254.

Fixed IP setting method in Windows XP system

1. Right-click the network neighbor and click "Properties".

2. Right-click "Local connection"-> Click "Properties"

3. Double-click "Internet Protocol (TCP/IP)"

4 、 Select "use the following IP address" and "use the following DNS server address"-> then fill in 192.168.0.X (any value range of X is between 2-254X) after "ip address". Fill in "255.255.255.0" after "Subnet Mask"-> "default Gateway" option fill in the LAN port of your router. Address-> fill in the DNS server address recorded in the running state of the router after preferred DNS Server address and alternate DNS Server address.

Fixed IP setting method in Windows 7 system

1. Right-click Network and select Properties.

2. Click "change Adapter Settings"

3. Right-click "Local connection", select "Properties", select "Internet Protocol version 4 (TCP/IPv4)", and click "Properties".

4. Check the options "use the following ip address" and "use the following DNS server address"-> fill in "192.168.0.X (the value range of X is 2-254X) after the" ip address "option. Any of this range is fine)-> "Subnet Mask" fill in "255.255.255.0"-> fill in the LAN port address of your router after "default gateway"-> fill in the DNS server address recorded in the running state of the router after "preferred DNS server address" and "backup DNS server address"-> Click "OK".

Fixed IP setting method in Windows 8 system

1. Install the Windows (the one between the Ctrl key and the alt key in the lower left corner of the keyboard) + R keys on the keyboard at the same time, and open the running program interface.

2. Type ncpa.cpl- > click "OK" in the running program (or press enter on the keyboard)

3. Right-click "Ethernet" and select "Properties"-> Select "Internet Protocol version 4 (TCP/IPv4)" and click "Properties" (or double-click "Internet Protocol version 4 (TCP/IPv4)").

4. Check the options "use the following ip address" and "use the following DNS server address"-> fill in "192.168.0.X (the value range of X is 2-254X) after the" ip address "option. Any of this range is fine)-> "Subnet Mask" fill in "255.255.255.0"-> fill in the LAN port address of your router after "default gateway"-> fill in the DNS server address recorded in the running state of the router after "preferred DNS server address" and "backup DNS server address"-> Click "OK".

After reading the above, have you mastered how to cooperate with the router to set up the computer static ip under the windows system? If you want to learn more skills or want to know more about it, you are welcome to follow the industry information channel, thank you for reading!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.