Shulou(Shulou.com)06/01 Report--

This article is about how to install Windows Server 2008 Active Directory Domain Services. The editor thinks it is very practical, so share it with you as a reference and follow the editor to have a look.

How is Windows Server 2008 Active Directory Domain Services installed? The specific process steps are described below.

Windows Server 2008 has been out for a long time, and I have been using it for some time, but I have never had a chance to experience the power of its Active Directory feature. Here is a brief explanation of the steps for installing Windows Server 2008 Active Directory domain service:

1. Click "start"-> "run", enter "dcpromo" and enter, and the following window pops up:

If you click "next" directly, you generally do not need to "use advanced mode" (unless you add a second DC for other use or are familiar with various settings)

two。 Click "next"

3. Because it is a new DC, select "New Domain in New Forest"

4. In the FQDN (F) column of the root domain of the directory forest, enter the domain name of the network you want to establish. If it is correct, press "next". Later, you will check whether there is any duplicate domain name on the same network segment.

5. On the "set Forest function level" page, if all the domain control stations in the forest are served by Windows Server 2008, you can raise the forest function level to Windows Server 2008, but for some applications that need to be bound with Active Directory, it is not recommended to raise the domain level to Windows Server 2008. When you are sure, press "next" and the "other Domain Control options" page opens.

Of course, 6.DNS has to choose. Just choose "next."

7. By the way, the server is checked to see if it has a fixed IP address before installing the DNS server role. At the same time, the warning appears (below) because the IPv6 is preset to start and the Lab uses IPv4, so the warning can be ignored by pressing "Yes, the computer will use a dynamically assigned IP address (not recommended)"-of course, the first fixed IP is *.

8. This warning message indicates that if the domain is a child domain, you must first upgrade the question to a paternal domain, and then set the action delegated by the DNS server. Because the Lab is the domain, you can ignore this warning message and press "Yes".

9. This... There is almost no need to change it, as long as it is in NTFS format.

10. Set the restore password, just like 2003, complex enough to remember

11. At this point, you can check whether there are any errors in the previous steps, and if not, you can directly "next step".

twelve。 Configuring various settings and services for about 5-6 minutes

13. At this point, the Active Directory domain service has been installed! Just restart, remember to choose Domain next time to log in, otherwise it will be turned away!

Thank you for reading! This is the end of the article on "how to install Windows Server 2008 Active Directory Domain Services". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, you can share it for more people to see!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.