Shulou(Shulou.com)06/03 Report--

First, install VCenter Server 6.7

1) find the installer

2) Click install

3) Click next

4) agree to the agreement

5) choose the embedded mode, usually deploy the embedded mode. Distributed deployment may be used when there are multiple sites.

6) enter the information of the ESXI host to be placed on the virtual machine, that is, the IP, port, account and password of the ESXI

7) Click YES

8) enter the name and password of the VCenter virtual machine, which is used to log in to the virtual machine, not to log on to the web management interface

9) Select the size of the software, and choose the size according to your actual situation. The chart below shows the number of ESXI hosts and virtual machines managed by different sizes.

10) Select the disk to be stored by the virtual machine, and select the disk mode, which will not take up too much space in the first place.

11) set the network information of VCenter. The network option is the port group of the virtual switch of the ESXi host. The FQDN option is to enter either the FQDN name or the IP name. It is recommended to enter the FQDN name, because some third playback software requires FQDN to be used, and it is convenient to use FQDN to change the IP later. IP address is used to access the web management interface.

12) wait for the first phase of deployment to be completed

13) Click continue to proceed to the second phase of deployment. Sometimes when the first phase of deployment is completed, you may not be able to enter the second phase automatically. At this time, you need to check whether there is a problem. After solving the problem, the browser enters https://ip:5480 (IP is the IP of VCenter) to proceed with the second phase of deployment.

14) Click NEXT

15) set the system time (follow the host and ntp), the time can be set later, it is best to set ntp, and then a lot of things need time calibration synchronization.

16) set the SSO domain name, which is used to log in to the web management interface with the account and password

17) Click next

18) to view the configuration information, click finish

19) Click OK

20) wait for the installation to complete

21) installation completed

II. Expansion

When 1.UI installs VCenter 6.7, it only completes the first part and mistakenly reports that it cannot enter the second part.

two。 Solution:

There may be a problem with DNS parsing. Try parsing forward and backward. If there is no problem, enter https://ip:5480 (IP is the IP of vcenter) and then perform the second phase of deployment. It is recommended to add host records in the client host.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.