In addition to Weibo, there is also WeChat
Please pay attention
WeChat public account
Shulou
2025-04-07 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Servers >
Share
Shulou(Shulou.com)06/02 Report--
Materials to be prepared: computer 1 (enable virtualization function, 4G + memory; CPU:i5 and above) Cent os system image, VMware Workstation software
Open VMware Workstation in the hardware settings section; click to create a new virtual machine
Select Custom (Advanced) in the pop-up virtual machine wizard
Select Workstation 12
Choose to install later
Select linux; and centos 64-bit
Name virtual machines so that they can be distinguished later when there are more virtual machines
Configure the number of CPU and cores
Set the memory of the virtual machine
Set the network type
Icano controller. Disk type is available by default.
Select disk
Select disk capacity
Disk file
Hardware setup is partially completed
Right-click to select settings in the system installation section
Select the ISO image and check the connection at startup
Turn on the virtual machine
Move the cursor to select install centos7
Press Tab and enter: net.ifnames=0 biosdevname=0 (there is an error in the scarlet letter in the figure), and enter after the input is completed.
Select Network Settings
You can change the host name by clicking configure... Set up the network
Check whether the name of the network card has been changed successfully, and if not, you can change it after you have installed the system.
Check the automatic connection when the network is available
Choose to set IP manually
Set IP address, subnet mask, etc.
Partition the hard disk
Choose your own partition
Select standard partition
Zoning
General partition scheme: / boot (200m is sufficient), swap (set 1.5 times the memory size below 8G), / (no need to set the amount of space allocated, the remaining space is allocated automatically)
Click to confirm the change
Click to install the software
Choose to minimize installation
Adjustable or non-adjustable
Set the root password and confirm it twice when you click back.
Click restart when the installation is complete
After restarting, the centos7 system is installed, and you can log in with the root+ password.
Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.
Views: 0
*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.
Continue with the installation of the previous hadoop.First, install zookooper1. Decompress zookoope
"Every 5-10 years, there's a rare product, a really special, very unusual product that's the most un
© 2024 shulou.com SLNews company. All rights reserved.