Shulou(Shulou.com)06/02 Report--

H3C R4900 G2 server installs the system through HDM

H3C R4900 G2 server installs WINSERVER2008R2SP1 system through HDM

Operating systems supported by H3C R4900 G2 server

Http://www.docin.com/p-2063082350.html

H3C R4900 G2 server for Raid reference

Http://www.h4c.com/cn/d_201707/1016095_30005_0.htm

HDM remote console login server, load ISO image to virtual optical drive, install WIN_SERVER_2008_R2_X64_SP1 system reference

Http://www.h4c.com/cn/d_201709/1032287_30005_0.htm

Raid card driver download link

Http://www.h4c.com/cn/Service/Document_Software/Software_Download/Server/Catalog/Rack_Server/G2/H3C_R390X_G2/

WINDOWS_Driver-54013 download link for Raid card H3C-UIS-RAID-1000/2000-M2

Http://www.h4c.com/cn/d_201607/937450_30005_0.htm

Problem solving:

1. Enter BIOS to find the IP address of the HDM port, and you can also see the IP address directly on the system startup interface. The default user name and password to log on to the HDM console is admin/Password@_.

2. When installing the WINSERVER2008R2X64SP1 system, in BIOS, set Boot Mode Select to Legacy Only. The system only supports a maximum of 2T hard drives (all hard drives and, in this case, RAID5's hard disk and close to 4T, only 2T is recognized). Set Boot Mode Select to UEFI Only, which supports hard drives greater than 2T and (unverified).

3. On the hardware page of the HDM console, find that the model of Raid card is H3C-UIS-RAID-2000-M2.

4. When you install the WINSERVER2008R2X64SP1 system and enter the partition interface, you can't find the hard disk, so you need to load the Raid card driver.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.